4.29 Fluorescent Lamp

4 Replacement Procedure

Setting the bezel

1.Put the bezel on the top of the frame and latch at four points. ((1) in the bellow figure)

2.Put the bezel on the bottom of the frame and latch at three points. ((2) in the bellow figure)

3.Hold the bottom side lightly and stick a double-side tape.

CAUTION: Be careful not to damage the cell, TAB and B/L.

Latch

at three point.

The reflector shall not

 

 

come out of the bezel.

 

 

 

Double-sided tape inside of the bottom of the bezel

Latch at four

The reflector shall notpoints come out of the bezel.

Figure 4-57 Replacing TMD fluorescent lamp (9)

PORTÉGÉ M500 Maintenance Manual (960-559)

[CONFIDENTIAL]

4-83

Page 313
Image 313
Toshiba SATELLITE U200 manual Replacing TMD fluorescent lamp