Toshiba SATELLITE U200 manual Touch pad Replacement Procedures, Installing the Touch pad

4.11 Touch pad 4 Replacement Procedures

Installing the Touch pad

To install the touch pad, follow the steps below and refer to Figure 4-16.

1.Open the insulator and connect the touch pad cable to the connector on the touch pad assembly.

2.Seat the fingerprint sensor cable on the touch pad.

3.Stick a new double-sided tape in place.

CAUTION: Do not reuse the removed double-sided tape.

4. Install a new touch pad to the slot and touch pad cover on it.

CAUTION: Do not reuse the removed touch pad.

5. Secure the touch pad assembly with the following screws.

• M2⋅4B BIND screw ⋅4

PORTÉGÉ M500 Maintenance Manual (960-559) [CONFIDENTIAL] 4-31