4.29 Fluorescent Lamp

4 Replacement Procedure

Assembling the cell with PCB

1.Turn the backlight on.

2.Check that the backlight is free of dust, foreign objects, or damage. Perform this check also for the reverse side of the cell. Peel of the separation sheet of double-sided tape fixing the cell of the back light. Then install the cell with PCB in the backlight unit.

CAUTION: 1. Set the cell with PCB as far as it goes to the left upper of the backlight unit.

2. be careful not to damage the TAB.

Cell

Double-sided tape fixing the cell

Figure 4-55 Replacing TMD fluorescent lamp (7)

PORTÉGÉ M500 Maintenance Manual (960-559)

[CONFIDENTIAL]

4-81

Page 311
Image 311
Toshiba SATELLITE U200 manual Replacing TMD fluorescent lamp