Toshiba SATELLITE U200 manual Replacement Procedures Fingerprint sensor board

4 Replacement Procedures 4.10 Fingerprint sensor board

4.10 Fingerprint sensor board

Removing the Fingerprint sensor board

To remove the fingerprint sensor board, follow the steps below and refer to Figure 4-15.

1.Lift up the hook and remove the bracket while sliding it in the direction of arrow in the figure below.

2.Remove the fingerprint sensor board fixed with the double-sided tape and peel off the tape that prevents a waterdrop from entering the computer.

3.Disconnect the fingerprint sensor cable from the connector on the fingerprint sensor board.

	Fingerprint sensor cable
	Hook
Bracket

Guide

Fingerprint sensor board

Guide

Double-sided tape

Figure 4-15 Removing the fingerprint sensor board

4-28 [CONFIDENTIAL] PORTÉGÉ M500 Maintenance Manual (960-559)