Toshiba SATELLITE U200 manual Audio CD, CD Sound Legacy test

3.29 Sound Test program 3 Tests and Diagnostics

3.29.3.2 Audio CD

Insert an audio CD and the following menu appears in the display.

CD/DVD TEST IN PROGRESS XXXXXXXX

xxxxxxxDIAGNOSTIC TEST VX.XX [Ctrl]+[Break] ; test end

[Ctrl]+[C] ; key stop

SUB-TEST	: XX	ERROR COUNT: XXXXX
PASS COUNT : XXXXX
WRITE DATA	: XX	READ DATA	: XX
ADDRESS	: XXXXXX	STATUS	: XXX

CD Sound track number (01-98 : Track) ?

Drive #	=	0, ATAPI status =00
Command	=	XX	=	XXXXXXXX]]
[[Block	address
[[Block	length		=	XXXXXXXX]]

Final : Block address = XXXXXXXXX

Select the track number you want to test and press Enter twice.

The following message appears in the display and selected track is played.

Play start CD sound !

Press any key <play stop>

After pressing any key, the music stops and the display returns to the selection menu of the track number.

NOTE: When the CD-ROM test is executed, [ALL DEVICE] must be selected in the “Device Config.=” of the BIOS SETUP. If the “ALL DEVICE” is not selected, music can not be played.

3.29.4 CD Sound (Legacy) test

To execute the CD Sound (Legacy) test, select 4 and press Enter.

CAUTION: Sound (Legacy) test is not supported in this model.

PORTÉGÉ M500 Maintenance Manual (960-559) [CONFIDENTIAL] 3-89