4.12 SW membrane | 4 Replacement Procedures |
2.Push down the hook and slide the SW membrane in the direction in the figure below.
3.Remove the SW membrane.
Hook
SW membrane
Figure 4-18 Removing the SW membrane (2)
Installing the SW membrane
To install the SW membrane, follow the steps below and refer to Figure
1.Install the SW membrane in the SW membrane holder while sliding it in the opposite direction at removing.
2.Install the SW membrane holder (with the SW membrane) to the slot while sliding it in the opposite direction at removing.
PORTÉGÉ M500 Maintenance Manual | [CONFIDENTIAL] |