4.23 LCD unit/FL inverter

4 Replacement Procedures

CAUTION: (continued)

(2)

(1)

The LCD mask is fixed to the bezel (metal frame) of LCD with double-sided tape on the back.

(4)

(3)

As shown in the figure, the bottom side of the LCD mask is fixed to the LCD bezel with double-sided tape. If the LCD mask is pulled toward you in removing it, the bezel may be deformed. When removing the bottom side, be sure to remove it carefully while removing the double-side tape slowly.

When the bezel of LCD deformed, replace the LCD unit with new one. When the LCD mask deformed, replace the display mask with new one.

4.Pull out the insulator under the LCD.

5.Remove the FL inverter while peeling off the double-sided tape.

6.Disconnect the cables from the FL inverter.

FL inverter

Insulator

Cable

Figure 4-40 Removing the FL inverter

PORTÉGÉ M500 Maintenance Manual (960-559)

[CONFIDENTIAL]

4-61

Page 291
Image 291
Toshiba SATELLITE U200 manual Removing the FL inverter