2.4 System Board Troubleshooting | 2 Troubleshooting Procedures |
Procedure 4 Replacement Check
The system board connectors may be disconnected. Disassemble the computer following the steps described in Chapter 4, Replacement Procedures and perform Check 1.
Check 1 Visually check for the following:
a)Cracked or broken connector housing
b)Damaged connector pins
If their connectors are in good condition, but there is still a problem, go to Check 2.
Check 2 The system board may be damaged. Replace the system board with a new one following the steps described in Chapter 4, Replacement Procedures.
PORTÉGÉ M500 Maintenance Manual | [CONFIDENTIAL] |
