3 Tests and Diagnostics | 3.20 ONLY ONE TEST |
Subtest 05 USB |
|
NOTE: When executing this subtest, USB test module and USB cable must be connected.
This subtest checks if USB port works properly.
The following menu appears in the display.
################################################################
######## ONLY ONE TEST Menu (XXXXXXXXX)######
################################################################
* | 0 | Port 0 | (Left side) |
| * | ||
* |
| * | |||||
* | 1 | Port | 1 | (Right | side Upper) | * | |
* | 9 | EXIT | 2 | (Right | side | Lower) | * |
* |
|
|
|
|
|
| * |
****************************************************************
.... Press test
Connect the USB test module and USB cable to the computer.
Input the port test number and press Enter.
OK message appears in the display if the test ends without fail.
NG message appears in the display if an error is found during the test.
Confirm the connection of cable, and then execute the test again.
Press 9 and Enter to return to ONLY ONE TEST menu.
Subtest 06 LED
This subtest checks if each LED lights properly.
The following message appears in the display in order. Follow the instructions in the display to execute the test.
[HDD Access LED test]
Press any key and following message appears in the display.
[Caps/Num/Overlay |
| ||||||||
(1) | Press [Caps | Lock | ] key | ! ...Caps | (on/off) | ||||
(2) | Press [Fn | + | F10 | ] | key | ! | ...Arrow | (on/off) | |
(3) | Press | [Fn | + | F11 | ] | key | ! | ...Num | (on/off) |
(4) | Slide | L&R]! | (on/off) | ||||||
Confirm corresponding LED lights properly.
Press Enter and following message appears in the display.
Check
Check if the color of the message changes blue to green alternately.
[CONFIDENTIAL] | PORTÉGÉ M500 Maintenance Manual |
