Toshiba SATELLITE U200 manual Cover FAT assembly Replacement Procedures

4.9 Cover FAT assembly 4 Replacement Procedures

4.9Cover FAT assembly

Removing the Cover FAT assembly

To remove the Cover FAT assembly, follow the steps below and refer to Figure 4-11 to 4-14.

1.Peel off the insulator that prevents a waterdrop from entering the computer and disconnect the SW membrane cable from the connector CN3260 on the system board.

2.Peel off the insulator that prevents a waterdrop from entering the computer and disconnect the touch pad cable and fingerprint sensor cable from the connector CN3240 and CN9520 on the system board.

Insulator Insulator

SW membrane cable

CN9520

CN3260

Fingerprint sensor cable

CN3240

Touch pad cable

Figure 4-11 Removing the Cover FAT assembly (1)

PORTÉGÉ M500 Maintenance Manual (960-559) [CONFIDENTIAL] 4-23