4.10 Fingerprint sensor board

4 Replacement Procedures

Installing the Fingerprint sensor board

To install the fingerprint sensor board, follow the steps below and refer to Figure 4-15.

1.Connect the fingerprint sensor cable to the connector on the fingerprint sensor board.

2.Stick a new double-sided tape in place and install the fingerprint sensor board while inserting it under the guides.

CAUTION: Do not reuse the removed double-sided tape.

3.Place the bracket while sliding it under the guides and inserting the slit into the guide.

PORTÉGÉ M500 Maintenance Manual (960-559)

[CONFIDENTIAL]

4-29

Page 259
Image 259
Toshiba SATELLITE U200 manual Fingerprint sensor board Replacement Procedures, Installing the Fingerprint sensor board