Toshiba SATELLITE U200 manual Setup by OS

3 Tests and Diagnostics 3.30 SETUP

(f)Beep Volume

This option selects the volume of beep (Warning). “OFF”, “Low”, “Medium” (Default) or “High” can be selected. If a memory module that does not comply with the standards, the computer beeps at maximum volume.

(g)Diagnostic Mode

This option sets whether the BIOS Setup Diagnostic test is enabled.

Disabled	The Diagnostic test is disabled. (Default)
Enabled	The Diagnostic test is enabled.

(h)Language During Bootup

This option selects the language during bootup. This message appears only on the model for TCL (Canada).

English	The message is displayed in English. (Default)
French	The message is displayed in French.

8.Configuration

This option displays the configuration method.

(a) Device Config.

The devices are initialized when the PNP OS loads.

Setup by OS	First, devices necessary for loading the OS will be
	initialized. After the PNP OS loads, the OS will
	initialize other devices. In this case, setup of PC Cards
	will be fixed to “Auto-Selected” and cannot be
	changed. (Default)
All Devices	All devices will be initialized.

If you are using an OS that does not have PNP capacity, select “All Devices.” The Display shows the following message:

Device Config. = All Devices

3-100 [CONFIDENTIAL] PORTÉGÉ M500 Maintenance Manual (960-559)