Toshiba SATELLITE U200 manual Replacing TMD fluorescent lamp

4.29 Fluorescent Lamp 4 Replacement Procedure

Removing the bezel

1.Without removing the insulation tape, turn the face of module up.

2.Release the four latches of the bezel and frame (two positions on each side).

3.Release the three latches on the top to remove the bezel from the cell (The bezel is reused.). As the bezel and cell at the lower side are fixed with a double-sided tape, remove the bezel solely.

CAUTION: 1.When releasing the latches, do not damage the TAB and PCB.

Release three latches

Double-sided tape in side of the lower bezel.

Release four latches

Figure 4-51 Replacing TMD fluorescent lamp (3)

PORTÉGÉ M500 Maintenance Manual (960-559) [CONFIDENTIAL] 4-77