4.6 Optical drive | 4 Replacement Procedures |
4.6Optical drive
Removing the Optical drive
To remove the optical drive, follow the steps below and refer to Figure
CAUTION: Do not put fingers in the optical drive. It may cause injury.
1. Remove the following two screws securing the slim select.
• | M2.5⋅4B | FLAT HEAD screw | ⋅1 |
• | M2.5⋅16B | FLAT HEAD screw | ⋅1 |
2.While sliding the hook in the direction of the arrow in the figure below, remove the optical drive (from connector on the system board).
M2.5⋅4B FLAT HEAD
M2.5⋅16B FLAT HEAD
Hook 
Optical drive
Figure 4-6 Removing the optical drive
PORTÉGÉ M500 Maintenance Manual | [CONFIDENTIAL] |
