Toshiba SATELLITE U200 manual Built-in HDD→ USB Default USB → Built-in HDD

3 Tests and Diagnostics 3.30 SETUP

(b) HDD Priority

This option enables to select the priority for the Built-in HDD or USB.

Built-in HDD→ USB (Default)

USB → Built-in HDD

(c)Network Boot Protocol

Use this option to set the starting method via a network.

PXE Sets to PXE protocol. (Default) RPL Sets to RPL protocol.

7.Others

Whether or not you need to configure the computer with these options depends primarily on the kind of software or peripherals you use.

(a)Core-Multi Processing

The Core Multi-Processing sets the CPU operating mode of Core Multi- Processor.

Enabled	Enables Core Multi-Processing functions. (Default)
Disabled	Disables Core Multi-Processing functions.

(b)Dynamic CPU Frequency Mode

Use this option to choose a setting from the followings.

Dynamically Switchable

Enables Intel SpeedStep technology. When the computer is in use, the CPU power consumption and clock speed are automatically switched when necessary. (Default)

Always High Disables Intel SpeedStep technology and always runs the processor at its fastest speed.

Always Low Disables Intel SpeedStep technology and always runs the processor at low power consumption and low speed.

3-98 [CONFIDENTIAL] PORTÉGÉ M500 Maintenance Manual (960-559)