4 Replacement Procedures

4.18 Harness holder / LAN cable

Installing the Harness holder / LAN cable

To install the Harness holder / LAN cable, follow the steps below and refer to Figure 4-24 and 4-25.

1.Install the LAN jack into the slot.

2.Pass the LCD cable and LAN cable in the guide of the harness holder and install the harness holder and secure it with the following screw.

• M2.5⋅4B

FLAT HEAD screw

⋅1

CAUTION: When passing the LCD cable and LAN cable, refer to the following figure.

Harness holder

LCD cable

LAN cable

3.Connect the LCD cable and LAN cable to the connectors CN5000 and CN4100 on the system board.

4-46

[CONFIDENTIAL]

PORTÉGÉ M500 Maintenance Manual (960-559)

Page 276
Image 276
Toshiba SATELLITE U200 manual Installing the Harness holder / LAN cable