Toshiba SATELLITE U200 manual Removing the wireless communication SW

4.20 Modem jack / Wireless communication SW 4 Replacement Procedures

4.Push the wireless communication SW from the inside of the base assembly to remove.

Wireless communication SW

Figure 4-30 Removing the wireless communication SW

Installing the Modem jack / Wireless communication SW

To install the Modem jack / Wireless communication SW, follow the steps below and refer to Figure 4-29 and 4-30.

1.Insert the wireless communication SW into the hole of the base assembly from the outside.

2.Install the Modem jack into the slot of the base assembly and pass the Modem jack cable into the slot and close the insulator.

PORTÉGÉ M500 Maintenance Manual (960-559) [CONFIDENTIAL] 4-51