Toshiba SATELLITE U200 manual Be careful not to damage the TAB, Replacing TMD fluorescent lamp

4.29 Fluorescent Lamp 4 Replacement Procedure

Removing the cell with PCB

1. Remove the cell with PCB from the backlight unit as shown bellow.

CAUTION: 1. As the back light cell are fixed with a double-sided tape, remove the cell with PCB slowly not to break the cell.

2. Be careful not to damage the TAB.

Cell with PCB

Double-sided tape

Figure 4-53 Replacing TMD fluorescent lamp (5)

PORTÉGÉ M500 Maintenance Manual (960-559) [CONFIDENTIAL] 4-79