Toshiba SATELLITE U200 manual Replacement Procedure Fluorescent Lamp

4 Replacement Procedure 4.29 Fluorescent Lamp

4.29.1 Replacing the 12.1-inch WXGA TMD Fluorescent Lamp

CAUTION: When replacing the fluorescent lamp, wear finger covers or gloves to avoid contaminating or damaging the LCD panel. Be careful not to let dust or other foreign substance into the module.

Disassembling the 12.1-inch WXGA TMD Fluorescent Lamp

To disassemble the 12.1-inch XGA TMD fluorescent lamp, follow the steps below and refer to Figure 4-49 to 4-58.

Peeling off the tapes and insulation sheets

1.Place it on a flat surface that is free of foreign objects.

Make sure no dirt on the face to protect the surface of the LCD module from damage. Put a protection sheet (e.g. soft cloth) on the face.

4-74 [CONFIDENTIAL] PORTÉGÉ M500 Maintenance Manual (960-559)