Manuals / Multi-Tech Systems / Computer Equipment / Computer Hardware

Multi-Tech Systems ISI5634PCI/4/8 manual

Models: ISI5634PCI/4/8

1 122

Download 122 pages 35.13 Kb

Page 39

6.After the modems install to the ports, click Finish to return to the General tab.

Chapter 3—Software/Driver Installation

6.After the modems install to the ports, click Finish to return to the General tab.

7.To view COM port assignments (and make changes if necessary), use the Modem Properties dialog box.

39

Image 39

Multi-Tech Systems ISI5634PCI/4/8 manual After the modems install to the ports, click Finish to return to the General tab

Contents

ISI5634PCI/4/8 User Guide TRADEMARKS User Guide Model ISI5634PCI/4/8P/N S0000109, Revision D Record of Revisions Revision DescriptionInstall ISI5634PCI card WITH auxiliary module ContentsChapter 2-Hardware Installation Install ISI5634PCI card WITHOUT auxiliary moduleLINUX-RPM -- Dial-in configuration LINUX Driver installation and loadingLINUX -- Dial-in configuration LINUX-RPM Pre-Installation IssuesChapter 1-Introduction and Description ISI5634PCI Modems IntroductionChapter 1-Introduction and Description IntelligentSerialInterfaceISI5634PCI Applications How to Use This ManualRelated Manuals What Is in Your Modem Package?82006501 TR29.2 Proposed Class 2 Fax Command Reference Manual S0000099 Voice +V Commands Developer’s GuideTechnical Specifications Computer RequirementsPhysical/Electrical/Environmental Chapter 2-Hardware Installation Introduction Safety Warnings TelecomHardware Installation Procedures Installing the ISI5634PCI card WITHOUT the auxiliary module8. Fasten the retaining bracket to computer chassis and replace cover Installing the ISI5634PCI card WITH the auxiliary module Mounting posts Mounting screws11. Fasten the retaining bracket to computer chassis and replace cover Chapter 3 - Software/Driver Installation Installing ISI5634PCI Software for Windows Introduction1. Shut down Windows 2000 and turn off the PC 3. Turn on the PC and start Windows ISI5634PCI/4/8 User Guide 9. A progress screen will appear briefly while files are being copied 8. The Driver File Search Results screen appearsChapter 3-Software/Driver Installation ClickNextISI5634PCI/4/8 User Guide 10. A completion screen will appear ClickFinish12. The Install Hardware Device Drivers screen appears ISI5634PCI/4/8 User Guide ClickNext16. Driver installation for the ISI5634PCI card is complete Chapter 3-Software/Driver InstallationClickFinish ISI5634PCI for Windows 2000 Installing Modems to COM Ports 1. Go to Start Settings Control Panel Phone and Modem Options2. The Location Information screen appears 6. The Add/Remove Hardware Wizard screen will appear ISI5634PCI/4/8 User Guide 7. The Install from Disk screen will appear8. The Install New Modem screen will appear Highlight “ISI5634PCI -8 PCI 56K Modem.” Click NextClickNext 9. The ‘Install New Modem - port list’ screen will appear10. A progress screen will appear as modem installation begins Chapter 3-Software/Driver InstallationISI5634PCI/4/8 User Guide 12. A completion screen will appear ClickFinish1. Go to Start Settings Control Panel Remove ISI5634PCI Driver Windows2. ClickonAdd/RemoveHardware.ClickNext ment Software server OSs only ISI5634PCI for Windows 2000 Installing ISI ManageInstalling the ISI5634PCI Card in Windows NT 3.51/4.0 6. The Select Network Adapter dialog box appears. Click Have Disk ClickAddISI5634PCI/4/8 User Guide 9. The ISI Cards dialog box appears. Click Add Page Installing Modems to COM Ports in Windows NT 4. The Install New Modem - Models dialog box appears 6. After the modems install to the ports, click Finish to return to the General tab 9. The Remote Access Setup dialog box appears. Click Add 12. When all modems have been added, click Continue ISI5634PCI Software Installation Procedure for Windows 95/98/Me Removing ISI5634PCI Driver in Windows NT 3.51/4.03. Select Multi-Tech 4, 8, 16-port ISI Card, and then click Remove 6. Follow either 6A or 6B, but not both ISI5634PCI/4/8 User Guide 9. Under Select Type of Card, do not check the Install ISA Card box11. When prompted to restart your computer, click Yes and click OK ClickNext 10. A completion screen appears14. When asked for the location at which Windows 95/98/Me should search for the new driver, check Specify a Location and enter the path file directory location of the driver ISI5634PCI/4/8 User Guide Chapter 3-Software/Driver Installation Installing Modems to COM Ports in Win 95 /98/MeClick Next. The modems will be installed to the designated COM ports Chapter 3-Software/Driver Installation 6. After the modem installs to the port, click Finishto the last three modem ports of the ISI5634PCI-4, OR to the last seven modem ports of the ISI5634PCI-8ISI5634PCI/4/8 User Guide Removing the ISI5634PCI Driver Windows 95/98/Me NetWare Driver InstallationConfiguring Ports for NetWare Connect SCO Open Server 5 Driver InstallationRemoving the Driver Novell To install from CD-ROM To format a floppy disk for SCO5To untar the driver file and copy files onto floppy disk 3. Select Install New To install driver from floppy diskMultiTech Installation Script 1. This text appears on the screen basename Length is one to four characters basename prefixboard numberport letterPrinter base name selected ttylbx Activating Ports in SCO Open Serverenable ttyl1A LINUX Pre-Installation IssuesLinux Driver for ISI5634PCI-4/8 Removing the Driver SCO Open ServerLINUX Copying the driver from the media LINUX Copying and untarring the driver from CD-ROMLINUX Copying and untarring the driver from a floppy Steps for copying the driver from a floppy LINUX Driver installation and loadingLINUX Verifying the ports LINUX Setting the baud rateLINUX TTY Devices Created by the Drivers Devices mapped for modem cards ISI5634PCI-4 and ISI5634PCI-8 cards LINUX -- Dial-in configurationLINUX -- PPP setup For ISI5634PCI-8 cards 8 portsRemoving the ISI Driver Linux MiscellaneousLINUX-RPM Copying the driver from CD-ROM LINUX-RPM Pre-Installation IssuesRedHat Linux 6.2/7.0 RPM Drivers for ISI5634PCI-4/8 Server Cards LINUX-RPM Copying the driver from the mediaLINUX-RPM Copying the driver from a floppy The ISI driver .rpm file can be copied from a DOS formatted floppy using the mcopy command if the mtools have been installedSteps for copying the driver from a floppy 5a. For RPM version LINUX-RPM TTY Devices Created by the Drivers LINUX-RPM Verifying the portsFor ISI5634PCI-8 cards 8 ports LINUX-RPM -- Dial-in configurationLINUX-RPM -- PPP setup Chapter 3-Software/Driver InstallationNumber Installing and Configuring Your SoftwareCommands Removing the ISI Driver Linux-RPMFor a Macintosh, the initialization should include the &D0 command References ISI5634PCI User GuideThe World Wide Web Chapter AT Commands, S-Registers, & Result CodesISI5634PCI/4/8 User Guide AT CommandsAttentionCode AT Command SummaryRepeatLastCommand CommunicationStandardSettingATDT1028806127853500$123456789 Carrier ControlDial Dial string modifiersEcho Online Data Characters Command DS=y Dial Stored Telephone NumberEchoCommandModeCharacters ERRORPulse Dialing Return Online to Data ModeResult Codes Enable/Disable ModulationHandshakeResultCodeFormat Set Register ValueRead Register Value Tone DialingCommand X n Result Code Selection ModemResetLong Space Disconnect V.32 Auto RetrainDataTerminalReadyDTRControl LoadFactorySettingsNote See also the Z command Data Carrier Detect DCD ControlAsynchronousCommunicationsMode Auxiliary Relay ControlFlow Control Selection CommunicationsModeSelect Stored Configuration for Hard Reset V.54 Test CommandsDisplay Current Settings Command &Wn Store Current ConfigurationModemPortFlowControl Command &Zy=xStore Dialing CommandSelect Maximum MNP Block Size Transmit BreakOnline command mode. The modem receives a \Bn Break ControlProtocol Result Code Error Correction Mode SelectionInactivityTimer ing the value of S30Data Calling Tone Command %Cn Data Compression ControlCommand %DCnATCommandControl XON/XOFFPass-ThroughCommand #CBAn Callback Attempts after power-upCommand %En FallbackandFallForwardControl Command +ES=n EnableSynchronousBufferedModeCommand #CBIn Callback Inactivity Timer Command #CBDn Callback DelayCommand #CBF? Callback Failed Attempts Display Command #CBFR Callback Failed Attempts ResetStore Setup Password Callback Security ResetCommand #CBSn Callback Enable/Disable EnterSetupPasswordAT+FCLASS=8 OKR is Ring Controlling DTMF Functionality with the command +FCLASS=Command %%%ATcrRemote ConfigurationEscape Sequence I ~About DTMF S-Registers Page 0 = maximum modem speed the S36 and S48 configuration settings For testing and debugging onlyWhen 56K auto is disabled, fallback to Enables/disables V.32bis start-up autoBusy signal detected Command executedRing signal detected Invalid commandConnected at 52000 bps, 56K rate DELAYEDConnected at 48000 bps, 56K rate Connected at 50000 bps, 56K rateChapter Warranty, Service, and Tech SupportSoftware User License Agreement Licensee agrees to implement sufficient security measures to protect Multi-Tech Systems’, Inc. proprietary interests and not to allow the use, copying or transfer by any means, other than in accordance with this agreement On-Line Warranty Registration Limited WarrantyRecording ISI5634PCI Information Tech SupportAbout the Internet ServiceAppendices Appendix A-Regulatory Information FCC Regulations for Telephone Line Interconnection9. This equipment should not be used on party lines or coin lines Class A Statement Industry CanadaFCC Part Canadian Limitations Notice Ringer Equivalence Number Fax Branding Statement EMC, Safety and R&TTE Directive ComplianceInternational Modem Restrictions New Zealand Telecom Warning NoticeISI4608 Owners Manual Index Symbols IndexISI5634PCI/4/8 User Guide Index ISI5634PCI/4/8 User Guide Index ISI5634PCI/4/8 User Guide Index ISI5634PCI/4/8 User Guide