Multi-Tech Systems ISI5634PCI/4/8 manual Command &Zy=xStore Dialing Command, Transmit Break

ISI5634PCI/4/8 User Guide

Command: &Zy=xStore Dialing Command

Values:	y = 0–3 (callback security disabled) or 0–29 (callback
	security enabled)
	x = Dialing command
Default:	None
Description:	Stores dialing command x in memory location y. Dial the
	stored number using the command ATDS=y. See also
	the #CBSn command. For callback security options, see
	Chapter 6.
Command: \An	Select Maximum MNP Block Size
Values:	n = 0, 1, 2, or 3
Default:	3
Description: \A0	64-charactermaximum.
\A1	128-charactermaximum.
\A2	192-charactermaximum.
\A3	256-charactermaximum.
Command: \Bn	Transmit Break
Values:	n = 0–9 in 100 ms units
Default:	3
Description:	In non-error-correction mode only, sends a break signal
	of the specified length to a remote modem. Works in
	conjunction with the \K command.
Command: \Gn	ModemPortFlowControl
Values:	n = 0
Default:	0
Description: \G0	Returns an OK for backward compatibility with some
	software.
\G1	Not supported—responds ERROR.
Command: \Jn	DataBufferControl
Values:	n = 0
Default:	0
Description: \J0	Enable data buffer—serial port speed is independent of
	connect speed.
\J1	Disable data buffer—serial port speed is forced to the
	line speed.

86