Using your microwave oven
Microwave oven controls
There are three ports in the control section
These will be covered on the following pages. Read them carefully.
When you first plug in the oven, a tone sounds and the Display will be blank. If after you set tl Clock (page 6) the Display becomes blank again, it means your electricity was off for 0 while. Reset the Clock
Digital display/clock and indicator
When you are not using the microwave oven, this is an accu- rate digital clock. When you are using the microwave oven, this displays time set- tings, indicator lights and shows you what number pads you touched.
Command pads
what order. A few examples:
- STARTtells the oven to start See
page18 for information on the tone you hear when touching any pad.
Each Command Pad, except STARTand CANCEL, lights an Indicator Light. The Indi- cator Light comes on when you touch the Command Pad.
While the oven is running, an Indicator Light [or lights) will be on to show what the oven is doing.
