ClickNext | Multi-Tech Systems ISI5634PCI/4/8 guide

ISI5634PCI/4/8 User Guide

13.The Locate Driver Files screen appears (Windows 2000 is seeking the ISI Port device driver). Select “CD-ROM drives” and clickNext.

14.The Driver Files Search Results screen will indicate that the “isiport.inf” file has been found on the CD-ROM.

ClickNext.

24

Image 24

Multi-Tech Systems ISI5634PCI/4/8 manual ClickNext

Contents

ISI5634PCI/4/8 User Guide User Guide Model ISI5634PCI/4/8 Contents RedHat Linux 6.2/7.0 RPM Drivers for 102104 105 Introduction and Description Introduction ISI5634PCI Modems IntelligentSerialInterface Introduction and Description How to Use This Manual ISI5634PCI Applications What Is in Your Modem Package? Related ManualsFull User Guide on CD-ROM Following related manuals are available on request Technical Specifications Computer RequirementsPhysical/Electrical/Environmental Pentium- based PC or compatible with PCI Bus Architecture Hardware Installation Safety Warnings Telecom Hardware Installation ProceduresInstalling the ISI5634PCI card Without the auxiliary module Hardware Installation Installing the ISI5634PCI card with the auxiliary module Mounting screws ISI5634PCI/4/8 User Guide Software/Driver Installation Installing ISI5634PCI Software for Windows Shut down Windows 2000 and turn off the PC Software/Driver Installation ISI5634PCI/4/8 User Guide Driver File Search Results screen appears Completion screen will appear ClickFinish Install Hardware Device Drivers screen appears Times for the ISI5634PCI-8 or Times for the ISI5634PCI-4Select Search for a suitable driver ... and click Next ClickNext Driver installation for the ISI5634PCI card is complete ISI5634PCI for Windows 2000 Installing Modems to COM Ports Add/Remove Hardware Wizard screen will appear Click Have Disk ISI5634PCI/4/8 User Guide Software/Driver Installation ISI5634PCI/4/8 User Guide Remove ISI5634PCI Driver Windows ISI5634PCI/4/8 User Guide Installing the ISI5634PCI Card in Windows NT 3.51/4.0 ClickAdd Select Network Adapter dialog box appears. Click Have Disk Software/Driver Installation ISI5634PCI/4/8 User Guide Installing Modems to COM Ports in Windows NT Install New Modem Models dialog box appears Software/Driver Installation ISI5634PCI/4/8 User Guide Software/Driver Installation To complete an uninstall, reboot your computer Removing ISI5634PCI Driver in Windows NT 3.51/4.0Network dialog box appears. Click the Adapters tab Turn off the PC Follow either 6A or 6B, but not both ISI5634PCI/4/8 User Guide Page ISI5634PCI/4/8 User Guide Installing Modems to COM Ports in Win 95 /98/Me ISI5634PCI/4/8 User Guide Software/Driver Installation ISI5634PCI/4/8 User Guide NetWare Driver Installation Removing the ISI5634PCI Driver Windows 95/98/Me Configuring Ports for NetWare Connect SCO Open Server 5 Driver InstallationRemoving the Driver Novell To install from CD-ROM To format a floppy disk for SCO5To untar the driver file and copy files onto floppy disk # cd Enter To install driver from floppy disk Select Install NewHighlight driver file from local host and select Continue MultiTech Installation Script This text appears on the screen Basename prefixboard numberport letter ISI5634PCI/4/8 User Guide Activating Ports in SCO Open Server Ttylbx Linux Pre-Installation Issues Linux Driver for ISI5634PCI-4/8Removing the Driver SCO Open Server Issued from time to time Linux Copying the driver from the mediaLinux Copying and untarring the driver from CD-ROM Linux Copying and untarring the driver from a floppy Linux Driver installation and loading Steps for copying the driver from a floppy Linux Setting the baud rate Linux Verifying the portsTo view busy IRQs, enter Linux TTY Devices Created by the Drivers For the ISI5634PCI-4, it uses the followingFor the ISI5634PCI-8, it uses the following Linux -- Dial-in configuration Linux -- PPP setupFor ISI5634PCI-4 cards 4 ports Miscellaneous Removing the ISI Driver LinuxTo load the driver manually, use insmod LINUX-RPM Pre-Installation Issues Mount the CD-ROM using this commandLINUX-RPM Copying the driver from the media LINUX-RPM Copying the driver from CD-ROM List the RPM files on the CD-ROM using this command ls For RPM version 6.2, issue the commandFor RPM version 7.0, issue the command Software/Driver Installation LINUX-RPM Verifying the ports LINUX-RPM TTY Devices Created by the Drivers LINUX-RPM -- Dial-in configuration LINUX-RPM -- PPP setup Installing and Configuring Your Software CommandsRemoving the ISI Driver Linux-RPM Number Software/Driver Installation References ISI5634PCI User GuideWorld Wide Web Chapter AT Commands AT Command Summary RepeatLastCommandCommunicationStandardSetting Answer Carrier Control DialATDT1028806127853500$123456789 Command DS=y Dial Stored Telephone Number EchoCommandModeCharactersEcho Online Data Characters HookControl Return Online to Data Mode Result Codes Enable/DisableModulationHandshake Pulse Dialing Set Register Value Read Register ValueTone Dialing ResultCodeFormat ModemReset Long Space DisconnectAuto Retrain LoadFactorySettings Data Carrier Detect DCD ControlDataTerminalReadyDTRControl 22bis Guard Tone Control Auxiliary Relay Control Flow Control SelectionCommunicationsMode AsynchronousCommunicationsMode Test Commands Display Current SettingsCommand &Wn Store Current Configuration Select Stored Configuration for Hard Reset Command &Zy=xStore Dialing Command Select Maximum MNP Block SizeTransmit Break ModemPortFlowControl Break Control Error Correction Mode Selection InactivityTimerProtocol Result Code Command %Cn Data Compression Control Command %DCnATCommandControlXON/XOFFPass-Through Data Calling Tone Command %En FallbackandFallForwardControl Command +ES=n EnableSynchronousBufferedModeCommand #CBAn Callback Attempts DTR Dialing Command #CBDn Callback Delay Command #CBF? Callback Failed Attempts DisplayCommand #CBFR Callback Failed Attempts Reset Command #CBIn Callback Inactivity Timer Callback Security Reset Command #CBSn Callback Enable/DisableEnterSetupPassword Store Setup Password Controlling Dtmf Functionality with the command +FCLASS= Mostly to issue hangup command +++ATHcrCommand %%%ATcrRemote ConfigurationEscape Sequence Remote modem. The remote configuration escape About Dtmf Digit Low High Registers Disables remote configuration Decimal 255 Disables, 1-255 enables ModulationTimer. See also the \T command A negotiation failure when error = maximum modem speed = reserved= 1200/75 bps = 300 bps Is also disabled = disable = enable S43 decimalFor certain types of connections S89 seconds 255 Sets the length of time in the off-line Result Codes Verbose Description Delayed Blacklisted Dialed number is blacklisted Warranty, Service, and Tech Support Software User License Agreement 103 Limited Warranty On-Line Warranty Registration Tech Support Recording ISI5634PCI Information Service About the Internet Appendices 108 Woodale Drive 800328-9717612785-3500 Fax612785-9874 Class a Statement Industry CanadaFCC Part Canadian Limitations Notice Ringer Equivalence Number EMC, Safety and R&TTE Directive Compliance Fax Branding Statement New Zealand Telecom Warning Notice International Modem Restrictions 114 Index Index 117 118 119 120 121 122