Multi-Tech Systems ISI5634PCI/4/8 manual Hardware Installation

Chapter 2—Hardware Installation

4.To avoid damaging the ISI5634PCI card and your PC, make sure your computer and any peripheral equipment connected to it are turned off. The ISI5634PCI can be installed in any Pentium equivalent PCI bus computer.

5.Remove the cover of your computer as instructed in your computer’s documentation.

6.Locate the unused PCI slot you will be using for your ISI5634PCI card and remove the slot cover according to instructions in your computer’s documentation.

7.Install the ISI5634PCI card into the selected expansion slot in the same manner as any other add-on card, as instructed in your computer’s documentation.

8.Fasten the retaining bracket to computer chassis and replace cover.

9.Plug one end of the phone cable into each modem’s LINE jack and the other end into a phone line wall jack.

There are 8 phone line receptacles on the ISI5634PCI-4, as well as 8 phone line receptacles on the ISI5634PCI-8. However, only four of these receptacles are functional on the ISI5634PCI-4 card.

When connecting phone lines to the ISI5634PCI-4, be sure to use the first four receptacles on ISI5634PCI-4 card, starting at the edge of the board with the screw-hole for attaching the card to the computer chassis.

Note: The LINE jack is not interchangeable with the wall jack. Do not plug the phone into the LINE jack or the line cable into the wall jack.

Note: The Federal Communications Commission (FCC) and Industry Canada impose certain restrictions on equipment connected to public telephone systems. See Appendix A— Regulatory Information for more information.

10.Turn on the power to the computer. You now are ready to install the software/drivers.

13