ISI5634PCI/4/8 User Guide
Record of Revisions Revision Description
User Guide Model ISI5634PCI/4/8
P/N S0000109, Revision D
TRADEMARKS
Install ISI5634PCI card WITHOUT auxiliary module
Contents
Chapter 2-Hardware Installation
Install ISI5634PCI card WITH auxiliary module
LINUX-RPM Pre-Installation Issues
LINUX Driver installation and loading
LINUX -- Dial-in configuration
LINUX-RPM -- Dial-in configuration
Chapter 1-Introduction and Description
Introduction
ISI5634PCI Modems
IntelligentSerialInterface
Chapter 1-Introduction and Description
How to Use This Manual
ISI5634PCI Applications
S0000099 Voice +V Commands Developer’s Guide
What Is in Your Modem Package?
82006501 TR29.2 Proposed Class 2 Fax Command Reference Manual
Related Manuals
Physical/Electrical/Environmental
Technical Specifications
Computer Requirements
Chapter 2-Hardware Installation
Installing the ISI5634PCI card WITHOUT the auxiliary module
Safety Warnings Telecom
Hardware Installation Procedures
Introduction
8. Fasten the retaining bracket to computer chassis and replace cover
Installing the ISI5634PCI card WITH the auxiliary module
Mounting screws
Mounting posts
11. Fasten the retaining bracket to computer chassis and replace cover
Chapter 3 - Software/Driver Installation
1. Shut down Windows 2000 and turn off the PC
Installing ISI5634PCI Software for Windows
Introduction
3. Turn on the PC and start Windows
ISI5634PCI/4/8 User Guide
ClickNext
8. The Driver File Search Results screen appears
Chapter 3-Software/Driver Installation
9. A progress screen will appear briefly while files are being copied
10. A completion screen will appear ClickFinish
ISI5634PCI/4/8 User Guide
12. The Install Hardware Device Drivers screen appears
ClickNext
ISI5634PCI/4/8 User Guide
ClickFinish
16. Driver installation for the ISI5634PCI card is complete
Chapter 3-Software/Driver Installation
2. The Location Information screen appears
ISI5634PCI for Windows 2000 Installing Modems to COM Ports
1. Go to Start Settings Control Panel Phone and Modem Options
6. The Add/Remove Hardware Wizard screen will appear
Highlight “ISI5634PCI -8 PCI 56K Modem.” Click Next
7. The Install from Disk screen will appear
8. The Install New Modem screen will appear
ISI5634PCI/4/8 User Guide
Chapter 3-Software/Driver Installation
9. The ‘Install New Modem - port list’ screen will appear
10. A progress screen will appear as modem installation begins
ClickNext
12. A completion screen will appear ClickFinish
ISI5634PCI/4/8 User Guide
2. ClickonAdd/RemoveHardware.ClickNext
1. Go to Start Settings Control Panel
Remove ISI5634PCI Driver Windows
ISI5634PCI for Windows 2000 Installing ISI Manage
ment Software server OSs only
Installing the ISI5634PCI Card in Windows NT 3.51/4.0
ISI5634PCI/4/8 User Guide
6. The Select Network Adapter dialog box appears. Click Have Disk
ClickAdd
9. The ISI Cards dialog box appears. Click Add
Page
Installing Modems to COM Ports in Windows NT
4. The Install New Modem - Models dialog box appears
6. After the modems install to the ports, click Finish to return to the General tab
9. The Remote Access Setup dialog box appears. Click Add
12. When all modems have been added, click Continue
3. Select Multi-Tech 4, 8, 16-port ISI Card, and then click Remove
ISI5634PCI Software Installation Procedure for Windows 95/98/Me
Removing ISI5634PCI Driver in Windows NT 3.51/4.0
6. Follow either 6A or 6B, but not both
ClickNext 10. A completion screen appears
9. Under Select Type of Card, do not check the Install ISA Card box
11. When prompted to restart your computer, click Yes and click OK
ISI5634PCI/4/8 User Guide
14. When asked for the location at which Windows 95/98/Me should search for the new driver, check Specify a Location and enter the path file directory location of the driver
ISI5634PCI/4/8 User Guide
Installing Modems to COM Ports in Win 95 /98/Me
Chapter 3-Software/Driver Installation
Click Next. The modems will be installed to the designated COM ports
6. After the modem installs to the port, click Finish
Chapter 3-Software/Driver Installation
ISI5634PCI/4/8 User Guide
to the last three modem ports of the ISI5634PCI-4, OR
to the last seven modem ports of the ISI5634PCI-8
NetWare Driver Installation
Removing the ISI5634PCI Driver Windows 95/98/Me
Removing the Driver Novell
Configuring Ports for NetWare Connect
SCO Open Server 5 Driver Installation
To untar the driver file and copy files onto floppy disk
To install from CD-ROM
To format a floppy disk for SCO5
To install driver from floppy disk
3. Select Install New
MultiTech Installation Script
1. This text appears on the screen
basename prefixboard numberport letter
basename Length is one to four characters
Printer base name selected
Activating Ports in SCO Open Server
ttylbx
Removing the Driver SCO Open Server
LINUX Pre-Installation Issues
Linux Driver for ISI5634PCI-4/8
enable ttyl1A
LINUX Copying and untarring the driver from a floppy
LINUX Copying the driver from the media
LINUX Copying and untarring the driver from CD-ROM
LINUX Driver installation and loading
Steps for copying the driver from a floppy
LINUX Setting the baud rate
LINUX Verifying the ports
LINUX TTY Devices Created by the Drivers
For ISI5634PCI-8 cards 8 ports
LINUX -- Dial-in configuration
LINUX -- PPP setup
Devices mapped for modem cards ISI5634PCI-4 and ISI5634PCI-8 cards
Miscellaneous
Removing the ISI Driver Linux
LINUX-RPM Copying the driver from the media
LINUX-RPM Pre-Installation Issues
RedHat Linux 6.2/7.0 RPM Drivers for ISI5634PCI-4/8 Server Cards
LINUX-RPM Copying the driver from CD-ROM
Steps for copying the driver from a floppy
LINUX-RPM Copying the driver from a floppy
The ISI driver .rpm file can be copied from a DOS formatted floppy using the mcopy command if the mtools have been installed
5a. For RPM version
LINUX-RPM Verifying the ports
LINUX-RPM TTY Devices Created by the Drivers
Chapter 3-Software/Driver Installation
LINUX-RPM -- Dial-in configuration
LINUX-RPM -- PPP setup
For ISI5634PCI-8 cards 8 ports
Removing the ISI Driver Linux-RPM
Installing and Configuring Your Software
Commands
Number
For a Macintosh, the initialization should include the &D0 command
The World Wide Web
References
ISI5634PCI User Guide
AT Commands, S-Registers, & Result Codes
Chapter
AT Commands
ISI5634PCI/4/8 User Guide
CommunicationStandardSetting
AT Command Summary
RepeatLastCommand
AttentionCode
Dial string modifiers
Carrier Control
Dial
ATDT1028806127853500$123456789
ERROR
Command DS=y Dial Stored Telephone Number
EchoCommandModeCharacters
Echo Online Data Characters
ModulationHandshake
Return Online to Data Mode
Result Codes Enable/Disable
Pulse Dialing
Tone Dialing
Set Register Value
Read Register Value
ResultCodeFormat
V.32 Auto Retrain
ModemReset
Long Space Disconnect
Command X n Result Code Selection
Data Carrier Detect DCD Control
LoadFactorySettings
Note See also the Z command
DataTerminalReadyDTRControl
CommunicationsMode
Auxiliary Relay Control
Flow Control Selection
AsynchronousCommunicationsMode
Command &Wn Store Current Configuration
V.54 Test Commands
Display Current Settings
Select Stored Configuration for Hard Reset
Transmit Break
Command &Zy=xStore Dialing Command
Select Maximum MNP Block Size
ModemPortFlowControl
Break Control
Online command mode. The modem receives a \Bn
ing the value of S30
Error Correction Mode Selection
InactivityTimer
Protocol Result Code
XON/XOFFPass-Through
Command %Cn Data Compression Control
Command %DCnATCommandControl
Data Calling Tone
Command +ES=n EnableSynchronousBufferedMode
after power-up
Command %En FallbackandFallForwardControl
Command #CBAn Callback Attempts
Command #CBFR Callback Failed Attempts Reset
Command #CBDn Callback Delay
Command #CBF? Callback Failed Attempts Display
Command #CBIn Callback Inactivity Timer
EnterSetupPassword
Callback Security Reset
Command #CBSn Callback Enable/Disable
Store Setup Password
I ~
Controlling DTMF Functionality with the command +FCLASS=
Command %%%ATcrRemote ConfigurationEscape Sequence
AT+FCLASS=8 OKR is Ring
About DTMF
S-Registers
Page
0 = maximum modem speed
Enables/disables V.32bis start-up auto
For testing and debugging only
When 56K auto is disabled, fallback to
the S36 and S48 configuration settings
Invalid command
Command executed
Ring signal detected
Busy signal detected
Connected at 50000 bps, 56K rate
DELAYED
Connected at 48000 bps, 56K rate
Connected at 52000 bps, 56K rate
Warranty, Service, and Tech Support
Chapter
Software User License Agreement
Licensee agrees to implement sufficient security measures to protect Multi-Tech Systems’, Inc. proprietary interests and not to allow the use, copying or transfer by any means, other than in accordance with this agreement
Limited Warranty
On-Line Warranty Registration
Tech Support
Recording ISI5634PCI Information
Service
About the Internet
Appendices
FCC Regulations for Telephone Line Interconnection
Appendix A-Regulatory Information
9. This equipment should not be used on party lines or coin lines
FCC Part
Class A Statement
Industry Canada
Canadian Limitations Notice Ringer Equivalence Number
EMC, Safety and R&TTE Directive Compliance
Fax Branding Statement
New Zealand Telecom Warning Notice
International Modem Restrictions
ISI4608 Owners Manual
Index
ISI5634PCI/4/8 User Guide
Symbols
Index
Index
ISI5634PCI/4/8 User Guide
Index
ISI5634PCI/4/8 User Guide
Index
ISI5634PCI/4/8 User Guide