Multi-Tech Systems ISI5634PCI/4/8 ModulationHandshake, Return Online to Data Mode, Pulse Dialing

ISI5634PCI/4/8 User Guide

I11	Display diagnostic information for the last modem con-
	nection, such as DSP and firmware version, link type,
	line speed, serial speed, type of error correction/data
	compression, number of past retrains, etc.
Command: Nn	ModulationHandshake
Values:	n = 0 or 1
Default:	1

Description: N0 Modem performs handshake only at communication

	standard specified by S37 and the B command.
N1	Modem begins handshake at communication standard
	specified by S37 and the B command. During hand-
	shake, fallback to a lower speed can occur.
Command: On	Return Online to Data Mode
Values:	0, 1, 3
Default:	None

Description: O0 Exit online command mode and return to data mode (see

	+++AT<cr> escape sequence ).
O1	Issue a retrain and return to online data mode.
O3	Issue a rate renegotiation and return to data mode.
Command: P	Pulse Dialing
Values:	P, T
Default:	T
Description:	Configures the modem for pulse (non-touch-tone)
	dialing. Dialed digits are pulsed until a T command or
	dial modifier is received.
Command: Qn	Result Codes Enable/Disable
Values:	n = 0 or 1
Default:	0
Description: Q0	Enable result codes.
Q1	Disable result codes.
Q2	Returns an OK for backward compatibility with some
	software.

80