Multi-Tech Systems ISI5634PCI/4/8 specification

ISI5634PCI/4/8 User Guide

10. A completion screen will appear.

ClickFinish.

11.Immediately after the ISI driver installation has been completed, another Found New Hardware screen will appear briefly indicating that the “MultiTech ISI Port” has been detected.

22

Image 22

Multi-Tech Systems ISI5634PCI/4/8 manual Completion screen will appear ClickFinish

Contents

ISI5634PCI/4/8 User Guide User Guide Model ISI5634PCI/4/8 Contents 104 RedHat Linux 6.2/7.0 RPM Drivers for102 105 Introduction and Description Introduction ISI5634PCI Modems IntelligentSerialInterface Introduction and Description How to Use This Manual ISI5634PCI Applications Full User Guide on CD-ROM What Is in Your Modem Package?Related Manuals Following related manuals are available on request Physical/Electrical/Environmental Technical SpecificationsComputer Requirements Pentium- based PC or compatible with PCI Bus Architecture Hardware Installation Hardware Installation Procedures Safety Warnings TelecomInstalling the ISI5634PCI card Without the auxiliary module Hardware Installation Installing the ISI5634PCI card with the auxiliary module Mounting screws ISI5634PCI/4/8 User Guide Software/Driver Installation Installing ISI5634PCI Software for Windows Shut down Windows 2000 and turn off the PC Software/Driver Installation ISI5634PCI/4/8 User Guide Driver File Search Results screen appears Completion screen will appear ClickFinish Times for the ISI5634PCI-8 or Times for the ISI5634PCI-4 Install Hardware Device Drivers screen appearsSelect Search for a suitable driver ... and click Next ClickNext Driver installation for the ISI5634PCI card is complete ISI5634PCI for Windows 2000 Installing Modems to COM Ports Add/Remove Hardware Wizard screen will appear Click Have Disk ISI5634PCI/4/8 User Guide Software/Driver Installation ISI5634PCI/4/8 User Guide Remove ISI5634PCI Driver Windows ISI5634PCI/4/8 User Guide Installing the ISI5634PCI Card in Windows NT 3.51/4.0 ClickAdd Select Network Adapter dialog box appears. Click Have Disk Software/Driver Installation ISI5634PCI/4/8 User Guide Installing Modems to COM Ports in Windows NT Install New Modem Models dialog box appears Software/Driver Installation ISI5634PCI/4/8 User Guide Software/Driver Installation Network dialog box appears. Click the Adapters tab To complete an uninstall, reboot your computerRemoving ISI5634PCI Driver in Windows NT 3.51/4.0 Turn off the PC Follow either 6A or 6B, but not both ISI5634PCI/4/8 User Guide Page ISI5634PCI/4/8 User Guide Installing Modems to COM Ports in Win 95 /98/Me ISI5634PCI/4/8 User Guide Software/Driver Installation ISI5634PCI/4/8 User Guide NetWare Driver Installation Removing the ISI5634PCI Driver Windows 95/98/Me SCO Open Server 5 Driver Installation Configuring Ports for NetWare ConnectRemoving the Driver Novell To untar the driver file and copy files onto floppy disk To install from CD-ROMTo format a floppy disk for SCO5 # cd Enter Select Install New To install driver from floppy diskHighlight driver file from local host and select Continue MultiTech Installation Script This text appears on the screen Basename prefixboard numberport letter ISI5634PCI/4/8 User Guide Activating Ports in SCO Open Server Ttylbx Linux Driver for ISI5634PCI-4/8 Linux Pre-Installation IssuesRemoving the Driver SCO Open Server Linux Copying and untarring the driver from CD-ROM Issued from time to timeLinux Copying the driver from the media Linux Copying and untarring the driver from a floppy Linux Driver installation and loading Steps for copying the driver from a floppy Linux Verifying the ports Linux Setting the baud rateTo view busy IRQs, enter For the ISI5634PCI-4, it uses the following Linux TTY Devices Created by the DriversFor the ISI5634PCI-8, it uses the following Linux -- PPP setup Linux -- Dial-in configurationFor ISI5634PCI-4 cards 4 ports Removing the ISI Driver Linux MiscellaneousTo load the driver manually, use insmod LINUX-RPM Copying the driver from the media LINUX-RPM Pre-Installation IssuesMount the CD-ROM using this command LINUX-RPM Copying the driver from CD-ROM For RPM version 6.2, issue the command List the RPM files on the CD-ROM using this command lsFor RPM version 7.0, issue the command Software/Driver Installation LINUX-RPM Verifying the ports LINUX-RPM TTY Devices Created by the Drivers LINUX-RPM -- Dial-in configuration LINUX-RPM -- PPP setup Removing the ISI Driver Linux-RPM Installing and Configuring Your SoftwareCommands Number Software/Driver Installation ISI5634PCI User Guide ReferencesWorld Wide Web Chapter AT Commands CommunicationStandardSetting AT Command SummaryRepeatLastCommand Answer Dial Carrier ControlATDT1028806127853500$123456789 Echo Online Data Characters Command DS=y Dial Stored Telephone NumberEchoCommandModeCharacters HookControl ModulationHandshake Return Online to Data ModeResult Codes Enable/Disable Pulse Dialing Tone Dialing Set Register ValueRead Register Value ResultCodeFormat Long Space Disconnect ModemResetAuto Retrain DataTerminalReadyDTRControl LoadFactorySettingsData Carrier Detect DCD Control 22bis Guard Tone Control CommunicationsMode Auxiliary Relay ControlFlow Control Selection AsynchronousCommunicationsMode Command &Wn Store Current Configuration Test CommandsDisplay Current Settings Select Stored Configuration for Hard Reset Transmit Break Command &Zy=xStore Dialing CommandSelect Maximum MNP Block Size ModemPortFlowControl Break Control InactivityTimer Error Correction Mode SelectionProtocol Result Code XON/XOFFPass-Through Command %Cn Data Compression ControlCommand %DCnATCommandControl Data Calling Tone Command #CBAn Callback Attempts Command %En FallbackandFallForwardControlCommand +ES=n EnableSynchronousBufferedMode DTR Dialing Command #CBFR Callback Failed Attempts Reset Command #CBDn Callback DelayCommand #CBF? Callback Failed Attempts Display Command #CBIn Callback Inactivity Timer EnterSetupPassword Callback Security ResetCommand #CBSn Callback Enable/Disable Store Setup Password Command %%%ATcrRemote ConfigurationEscape Sequence Controlling Dtmf Functionality with the command +FCLASS=Mostly to issue hangup command +++ATHcr Remote modem. The remote configuration escape About Dtmf Digit Low High Registers Timer. See also the \T command Disables remote configurationDecimal 255 Disables, 1-255 enables Modulation A negotiation failure when error = 1200/75 bps = maximum modem speed= reserved = 300 bps For certain types of connections Is also disabled = disable= enable S43 decimal S89 seconds 255 Sets the length of time in the off-line Result Codes Verbose Description Delayed Blacklisted Dialed number is blacklisted Warranty, Service, and Tech Support Software User License Agreement 103 Limited Warranty On-Line Warranty Registration Tech Support Recording ISI5634PCI Information Service About the Internet Appendices 108 612785-3500 Woodale Drive800328-9717 Fax612785-9874 Industry Canada Class a StatementFCC Part Canadian Limitations Notice Ringer Equivalence Number EMC, Safety and R&TTE Directive Compliance Fax Branding Statement New Zealand Telecom Warning Notice International Modem Restrictions 114 Index Index 117 118 119 120 121 122