Multi-Tech Systems ISI5634PCI/4/8 manual To install from CD-ROM, To format a floppy disk for SCO5

Chapter 3—Software/Driver Installation

This present installation section is task-oriented with minimal explanation of procedural steps. The section Multi-Tech Installation Script, which immediately follows this section, presents additional details to aid in installation.

To install from CD-ROM:

#mount -r /dev/cd0 /mnt

#cd /mnt

#cd servcard/drivers/sco50x

#cp sco50x.tar /

#cd <ENTER>

To format a floppy disk for SCO5:

1.At the Unix prompt, run the scosh program.

2.Select Manager.

3.Select Archive.

4.Select Format.

5.Make sure that Device is pointed to the floppy drive.

6.Select Continue.

To untar the driver file and copy files onto floppy disk:

1.Make a temporary directory for the ISI driver files..

#mkdir /isi

2.Copy the tarred isi driver file into the temporary directory.

#cp sco50x.tar /isi

3.Untar this file and put its contents into the temporary directory.

#cd /isi

#tar xvf sco50x.tar

53