Multi-Tech Systems ISI5634PCI/4/8 manual Set Register Value, Read Register Value, Tone Dialing

	Chapter 4—AT Commands, S-Registers, Result Codes
Command: Sr=n	Set Register Value
Values:	r = S-register number; n varies
Default:	None
Description:	Set value of register Sr to value of n, where n is entered
	in decimal format. E.g., S0=1.
Command: Sr?	Read Register Value
Values:	r = S-register number
Default:	None
Description:	Read value of register Sr and display it in 3-digit
	decimal form. E.g., S2? gives the response 043.
Command: T	Tone Dialing
Values:	P, T
Default:	T
Description:	Configures the modem for DTMF (touch-tone) dialing.
	Dialed digits are tone dialed until a P command or dial
	modifier is received.
Command: Vn	ResultCodeFormat
Values:	n = 0 or 1
Default:	1
Description: V0	Displays result codes as digits (terse response).
V1	Displays result codes as words (verbose response).
Command: Wn	Result Code Options
Values:	n = 0, 1, or 2
Default:	2
Description: W0 CONNECT result code reports serial port speed,
	disables protocol result codes.
W1	CONNECT result code reports serial port speed, en-
	ables protocol result codes.
W2	CONNECT result code reports line speed, enables pro-
	tocol result codes.

81