Multi-Tech Systems ISI5634PCI/4/8 manual Removing the ISI5634PCI Driver Windows 95/98/Me

Chapter 3—Software/Driver Installation

Removing the ISI5634PCI Driver (Windows 95/98/Me)

1.Click Settings, Control Panel, and then double-click Add/Remove Programs.

2.From the list box, select MultiTech ISI Driver Device.

3.Click Add/Remove and follow screen instructions.

NetWare Driver Installation

Multi-Tech Systems provides AIO drivers for the ISI5634PCI cards, so they can function with Novell compatible asynchronous applications (e.g., NetWare Connect). The AIO driver is simply an NLM (NetWare Loadable Module) that runs on the file server. Drivers must be loaded on the file server where the board is installed. Drivers can be loaded from the file server’s console prompt or incorporated for autoloading in theAUTOEXEC.NCFfile.

The file AIOMTS.MDC contains Novell (version 3.12 and higher) initialization strings for ISI products not previously listed for use with BorderManager and Netware Connect. The file AIOMTS.MDC is included on the ISI Product Family CD. To benefit from the AIOMTS.MDC file, you must copy it from the CD to the appropriate directory on your computer.

To use AIOMTS.MDC under Border Manager, RAS, NIAS in 4.2 or 5.x:

Copy AIOMTS.MDC to your System directory.

To use AIOMTS.MDC under Novell NetWare 3.x, 4.1, 4.11 with NetWare Connect 2.0.28 or higher:

Copy AIOMTS.MDC to your System and System/AIO directory.

To install the Multi-Tech AIO driver, copy the file AIOISIX.NLM to the system directory of the file server from a workstation on the network. To copy, you can use the following command:

COPY E:\SERVCARD\DRIVERS\NOVELL\AIOSIX.NLM F:\SYSTEM

51