Multi-Tech Systems ISI5634PCI/4/8 manual

ISI5634PCI/4/8 User Guide

S5	decimal	0–32	8(^H)	Sets ASCII code for the backspace
		33–127		character. Values greater than 32
				disable backspace.
S6	seconds	2–65*	2*	Sets time the modem waits after it goes
				off-hook before it begins to dial the
				telephone number.
S7	seconds	1–255*	50*	Sets time the modem waits for a carrier
				signal before aborting a call. Also sets
				wait for silence time for the @ dial
				modifier.
S8	seconds	0–65	2	Sets length of a pause caused by a
				comma character in a dialing command.
S9	decimal	0,1–127	37(%)	Sets ASCII code for remote
				configuration escape character. S9=0
				disables remote configuration.
S10	100ms	1–254	20	Sets how long a carrier signal must be
				lost before the modem disconnects.
S11	1 ms	50–150*	95*	Sets spacing and duration of dialing
				tones.
S28	decimal	0,1–255	1	0 disables, 1–255 enables V.34
				modulation.
S30	1 minute	0,1–255	0	Sets length of time the modem waits
				before disconnecting when no data is
				sent or received. Value of zero disables
				the timer. See also the \T command
S35	decimal	0–1	0	0 disables, 1 enables the V.25 data calling
				tone, which allows remote data/fax/
				voice discrimination.
S36	decimal	0–7	7	Specifies the action to take in the event
				of a negotiation failure when error
				control is selected. (See S48.)
S37	decimal	0–19	0	Sets maximum V.34 upstream speed at

96