ISI5634PCI/4/8 User Guide
TRADEMARKS
User Guide Model ISI5634PCI/4/8
P/N S0000109, Revision D
Record of Revisions Revision Description
Install ISI5634PCI card WITH auxiliary module
Contents
Chapter 2-Hardware Installation
Install ISI5634PCI card WITHOUT auxiliary module
LINUX-RPM -- Dial-in configuration
LINUX Driver installation and loading
LINUX -- Dial-in configuration
LINUX-RPM Pre-Installation Issues
Chapter 1-Introduction and Description
ISI5634PCI Modems
Introduction
Chapter 1-Introduction and Description
IntelligentSerialInterface
ISI5634PCI Applications
How to Use This Manual
Related Manuals
What Is in Your Modem Package?
82006501 TR29.2 Proposed Class 2 Fax Command Reference Manual
S0000099 Voice +V Commands Developer’s Guide
Technical Specifications
Computer Requirements
Physical/Electrical/Environmental
Chapter 2-Hardware Installation
Introduction
Safety Warnings Telecom
Hardware Installation Procedures
Installing the ISI5634PCI card WITHOUT the auxiliary module
8. Fasten the retaining bracket to computer chassis and replace cover
Installing the ISI5634PCI card WITH the auxiliary module
Mounting posts
Mounting screws
11. Fasten the retaining bracket to computer chassis and replace cover
Chapter 3 - Software/Driver Installation
Installing ISI5634PCI Software for Windows
Introduction
1. Shut down Windows 2000 and turn off the PC
3. Turn on the PC and start Windows
ISI5634PCI/4/8 User Guide
9. A progress screen will appear briefly while files are being copied
8. The Driver File Search Results screen appears
Chapter 3-Software/Driver Installation
ClickNext
ISI5634PCI/4/8 User Guide
10. A completion screen will appear ClickFinish
12. The Install Hardware Device Drivers screen appears
ISI5634PCI/4/8 User Guide
ClickNext
16. Driver installation for the ISI5634PCI card is complete
Chapter 3-Software/Driver Installation
ClickFinish
ISI5634PCI for Windows 2000 Installing Modems to COM Ports
1. Go to Start Settings Control Panel Phone and Modem Options
2. The Location Information screen appears
6. The Add/Remove Hardware Wizard screen will appear
ISI5634PCI/4/8 User Guide
7. The Install from Disk screen will appear
8. The Install New Modem screen will appear
Highlight “ISI5634PCI -8 PCI 56K Modem.” Click Next
ClickNext
9. The ‘Install New Modem - port list’ screen will appear
10. A progress screen will appear as modem installation begins
Chapter 3-Software/Driver Installation
ISI5634PCI/4/8 User Guide
12. A completion screen will appear ClickFinish
1. Go to Start Settings Control Panel
Remove ISI5634PCI Driver Windows
2. ClickonAdd/RemoveHardware.ClickNext
ment Software server OSs only
ISI5634PCI for Windows 2000 Installing ISI Manage
Installing the ISI5634PCI Card in Windows NT 3.51/4.0
6. The Select Network Adapter dialog box appears. Click Have Disk
ClickAdd
ISI5634PCI/4/8 User Guide
9. The ISI Cards dialog box appears. Click Add
Page
Installing Modems to COM Ports in Windows NT
4. The Install New Modem - Models dialog box appears
6. After the modems install to the ports, click Finish to return to the General tab
9. The Remote Access Setup dialog box appears. Click Add
12. When all modems have been added, click Continue
ISI5634PCI Software Installation Procedure for Windows 95/98/Me
Removing ISI5634PCI Driver in Windows NT 3.51/4.0
3. Select Multi-Tech 4, 8, 16-port ISI Card, and then click Remove
6. Follow either 6A or 6B, but not both
ISI5634PCI/4/8 User Guide
9. Under Select Type of Card, do not check the Install ISA Card box
11. When prompted to restart your computer, click Yes and click OK
ClickNext 10. A completion screen appears
14. When asked for the location at which Windows 95/98/Me should search for the new driver, check Specify a Location and enter the path file directory location of the driver
ISI5634PCI/4/8 User Guide
Chapter 3-Software/Driver Installation
Installing Modems to COM Ports in Win 95 /98/Me
Click Next. The modems will be installed to the designated COM ports
Chapter 3-Software/Driver Installation
6. After the modem installs to the port, click Finish
to the last three modem ports of the ISI5634PCI-4, OR
to the last seven modem ports of the ISI5634PCI-8
ISI5634PCI/4/8 User Guide
Removing the ISI5634PCI Driver Windows 95/98/Me
NetWare Driver Installation
Configuring Ports for NetWare Connect
SCO Open Server 5 Driver Installation
Removing the Driver Novell
To install from CD-ROM
To format a floppy disk for SCO5
To untar the driver file and copy files onto floppy disk
3. Select Install New
To install driver from floppy disk
MultiTech Installation Script
1. This text appears on the screen
basename Length is one to four characters
basename prefixboard numberport letter
Printer base name selected
ttylbx
Activating Ports in SCO Open Server
enable ttyl1A
LINUX Pre-Installation Issues
Linux Driver for ISI5634PCI-4/8
Removing the Driver SCO Open Server
LINUX Copying the driver from the media
LINUX Copying and untarring the driver from CD-ROM
LINUX Copying and untarring the driver from a floppy
Steps for copying the driver from a floppy
LINUX Driver installation and loading
LINUX Verifying the ports
LINUX Setting the baud rate
LINUX TTY Devices Created by the Drivers
Devices mapped for modem cards ISI5634PCI-4 and ISI5634PCI-8 cards
LINUX -- Dial-in configuration
LINUX -- PPP setup
For ISI5634PCI-8 cards 8 ports
Removing the ISI Driver Linux
Miscellaneous
LINUX-RPM Copying the driver from CD-ROM
LINUX-RPM Pre-Installation Issues
RedHat Linux 6.2/7.0 RPM Drivers for ISI5634PCI-4/8 Server Cards
LINUX-RPM Copying the driver from the media
LINUX-RPM Copying the driver from a floppy
The ISI driver .rpm file can be copied from a DOS formatted floppy using the mcopy command if the mtools have been installed
Steps for copying the driver from a floppy
5a. For RPM version
LINUX-RPM TTY Devices Created by the Drivers
LINUX-RPM Verifying the ports
For ISI5634PCI-8 cards 8 ports
LINUX-RPM -- Dial-in configuration
LINUX-RPM -- PPP setup
Chapter 3-Software/Driver Installation
Number
Installing and Configuring Your Software
Commands
Removing the ISI Driver Linux-RPM
For a Macintosh, the initialization should include the &D0 command
References
ISI5634PCI User Guide
The World Wide Web
Chapter
AT Commands, S-Registers, & Result Codes
ISI5634PCI/4/8 User Guide
AT Commands
AttentionCode
AT Command Summary
RepeatLastCommand
CommunicationStandardSetting
ATDT1028806127853500$123456789
Carrier Control
Dial
Dial string modifiers
Echo Online Data Characters
Command DS=y Dial Stored Telephone Number
EchoCommandModeCharacters
ERROR
Pulse Dialing
Return Online to Data Mode
Result Codes Enable/Disable
ModulationHandshake
ResultCodeFormat
Set Register Value
Read Register Value
Tone Dialing
Command X n Result Code Selection
ModemReset
Long Space Disconnect
V.32 Auto Retrain
DataTerminalReadyDTRControl
LoadFactorySettings
Note See also the Z command
Data Carrier Detect DCD Control
AsynchronousCommunicationsMode
Auxiliary Relay Control
Flow Control Selection
CommunicationsMode
Select Stored Configuration for Hard Reset
V.54 Test Commands
Display Current Settings
Command &Wn Store Current Configuration
ModemPortFlowControl
Command &Zy=xStore Dialing Command
Select Maximum MNP Block Size
Transmit Break
Online command mode. The modem receives a \Bn
Break Control
Protocol Result Code
Error Correction Mode Selection
InactivityTimer
ing the value of S30
Data Calling Tone
Command %Cn Data Compression Control
Command %DCnATCommandControl
XON/XOFFPass-Through
Command #CBAn Callback Attempts
after power-up
Command %En FallbackandFallForwardControl
Command +ES=n EnableSynchronousBufferedMode
Command #CBIn Callback Inactivity Timer
Command #CBDn Callback Delay
Command #CBF? Callback Failed Attempts Display
Command #CBFR Callback Failed Attempts Reset
Store Setup Password
Callback Security Reset
Command #CBSn Callback Enable/Disable
EnterSetupPassword
AT+FCLASS=8 OKR is Ring
Controlling DTMF Functionality with the command +FCLASS=
Command %%%ATcrRemote ConfigurationEscape Sequence
I ~
About DTMF
S-Registers
Page
0 = maximum modem speed
the S36 and S48 configuration settings
For testing and debugging only
When 56K auto is disabled, fallback to
Enables/disables V.32bis start-up auto
Busy signal detected
Command executed
Ring signal detected
Invalid command
Connected at 52000 bps, 56K rate
DELAYED
Connected at 48000 bps, 56K rate
Connected at 50000 bps, 56K rate
Chapter
Warranty, Service, and Tech Support
Software User License Agreement
Licensee agrees to implement sufficient security measures to protect Multi-Tech Systems’, Inc. proprietary interests and not to allow the use, copying or transfer by any means, other than in accordance with this agreement
On-Line Warranty Registration
Limited Warranty
Recording ISI5634PCI Information
Tech Support
About the Internet
Service
Appendices
Appendix A-Regulatory Information
FCC Regulations for Telephone Line Interconnection
9. This equipment should not be used on party lines or coin lines
Class A Statement
Industry Canada
FCC Part
Canadian Limitations Notice Ringer Equivalence Number
Fax Branding Statement
EMC, Safety and R&TTE Directive Compliance
International Modem Restrictions
New Zealand Telecom Warning Notice
ISI4608 Owners Manual
Index
Symbols
Index
ISI5634PCI/4/8 User Guide
Index
ISI5634PCI/4/8 User Guide
Index
ISI5634PCI/4/8 User Guide
Index
ISI5634PCI/4/8 User Guide
