Multi-Tech Systems ISI5634PCI/4/8 manual Installing ISI5634PCI Software for Windows

ISI5634PCI/4/8 User Guide

Introduction

The ISI5634PCI card ships with drivers for each of the following operating systems: Windows® 2000, Windows NT, Windows 95, Windows 98, Windows Me, Novell Netware versions 3.x and 4.x, SCO Open Server 5, and Linux. This chapter describes the installation of these drivers.

In most cases, you will receive the ISI software drivers on a CD-ROM. In certain situations, however, software may be downloaded from the MultiTech web site, often onto diskette, and then installed. The instructions in this chapter generally presume that the driver files are being installed from CD-ROM and therefore show driver files being loaded from locations on the ISI CD-ROM. If installation is from diskette, you will be loading driver files from file path locations on that diskette. For example, a driver file found at E:\servcard\drivers\win2000\ when installing from CD- ROM, might be located simply at A:\ if installation is from diskette.

Installing a device driver modifies your system. For this reason, only the super user (system administrator) is allowed to perform the installation. If you cannot login as administrator, find the person in your organization with this authorization (i.e., password). To begin driver installation, login as administrator. Then proceed with the appropriate section: Windows 2000, Windows NT or Windows 95/98/ Me. For Novell Netware, you need rights to read and write to the SYSTEM directory. The Unix-based OSs SCO and Linux similarly require such administrative rights.

Installing ISI5634PCI Software for Windows 2000

NOTE: A series of ‘installation wizard’ screens will appear repeatedly during this procedure (step 12). This is not an error. Do not discontinue the procedure when the ‘installation wizard’ screens repeatedly appear.

1.Shut down Windows 2000 and turn off the PC.

2.Install the ISI5634PCI card in an available PCI expansion slot in the computer. Follow the computer manufacturer's instructions concerning installation of expansion cards. Observe standard precautions regarding electro-static discharge (ESD) when

18