Multi-Tech Systems ISI5634PCI/4/8 manual Removing ISI5634PCI Driver in Windows NT 3.51/4.0

ISI5634PCI/4/8 User Guide

Removing ISI5634PCI Driver in Windows NT 3.51/4.0

1.Click Start, Settings, Control Panel, and then double-clickNetwork.

2.The Network dialog box appears. Click the Adapters tab.

3.Select Multi-Tech 4, 8, 16-port ISI Card, and then click Remove.

4.To complete an uninstall, reboot your computer.

ISI5634PCI Software Installation Procedure for Windows 95/98/Me

1.Turn off the PC.

2.The ISI5634PCI card must be installed in an expansion slot in the computer. If not, follow the computer manufacturer's instructions concerning installation of expansion cards. Install the ISI5634PCI card in an available PCI expansion slot. Observe standard precautions regarding electro-static discharge (ESD) when handling the ISI board (the board should be kept in its shipping bag until used). During installation, handle the ISI circuit card by its edges and keep one hand in contact with the PC chassis.

3.Turn on the PC and start Windows 95/98/Me.

4.Windows will autodetect the ISI5634PCI card. When the Add New Hardware Wizard screen appears, click Cancel.

5.Insert the MultiTech ISI driver CD-ROM into the CD-ROM drive. (If driver was downloaded from MultiTech web site and placed on a diskette, insert diskette into floppy drive now.)

42