VeriFone 3350 manual Install/Replace Msam Cards

O3350 IG 19496 Book.book Page 18 Wednesday, April 5, 2000 10:30 PM

Omni 3350 Installation Guide

Perform a Power-On Printer Test

To ensure the printer is operating correctly:

1.Turn off power to the terminal.

2.Hold down the paper feed button and turn on the terminal. The printer test starts, then stops after a few seconds. When the test begins printing, release the paper feed button.

The test printout, with printer information and repeating character strings, is about 38 centimeters (15 inches) long.

3.Press the paper feed button to advance the paper roll a few centimeters (inches), then tear off the test printout.

Congratulations! Your Omni 3350 terminal should now be completely installed and ready to use.

Step 7: Install/Replace MSAM Cards

When you first receive your Omni 3350 terminal, you may need to install a merchant smart card, or one or more micromodule-size SAM (MSAM) cards. Or you may need to replace old cards with new ones. The directions below describe both procedures.

Caution: Observe standard precautions for handling electrostatically sensitive devices. Electrostatic discharges can damage this equipment.

1.Turn off power to the terminal.

2.To install a merchant smart card, grip the SAM drawer and pinch the locking lever (Figure 10). If the drawer already

18