VeriFone 3350 manual Cable Routing, CR 600 Check Reader Connection

O3350 IG 19496 Book.book Page 26 Wednesday, April 5, 2000 10:30 PM

Omni 3350 Installation Guide

1.If the cable is not already connected to the check reader, insert the small modular plug on one end of the cable into the check reader’s modular jack (Figure 17).

2.Insert the larger RJ45-type connector on the other end of the cable into the “RS232” serial port on the terminal’s back panel.

Omni 3350 Terminal

Omni 3350

RS232 Port

CR 600

CR 600

Serial Port

Figure 17 CR 600 Check Reader Connection

3.Turn on power to the terminal, then connect the check reader to a power source.

Cable Routing

VeriFone recommends the cable routing shown in Figure 18. Note that the cable guides have two larger openings for the use with optional device cables, and two smaller openings for use with telco and telset cables.

26