VeriFone 3350 manual Connect PIN Pad, Smart Card Reader, or Bar Code Wand

O3350 IG 19496 Book.book Page 24 Wednesday, April 5, 2000 10:30 PM

Omni 3350 Installation Guide

Optional Device	Connection Port
External LAN	RS232
PIN Pad	PIN Pad
RS232 Electronic Cash Register	RS232

Caution: Before connecting any peripheral device, turn off power to the terminal (the LED is off). Turn on power only after you are finished connecting the peripheral device(s). For complete information about peripheral installation and use, refer to the user documentation supplied with those devices.

Note: RS232-type devices do not work with the “PIN Pad” port; PIN Pad-type devices do not work with the “RS232” port. If an optional peripheral device does not function correctly, check the port connection.

Connect PIN Pad, Smart Card Reader, or Bar Code Wand

Refer to Figure 16:

1.If necessary, insert the small modular plug on one end of the PIN pad cable into the PIN pad’s modular jack.

For a bar code wand, insert the RJ45-type plug on the end of the cable into the “PIN Pad” serial port on the back panel.

2.If installing a PINpad 101, PINpad 201, or PINpad 1000, position and insert the grommet to secure the cable connection, as shown in Figure 16.

If a cable is not already connected to the smart card reader or PINpad 501, insert the small modular plug on one end of the interface cable into the optional device’s modular jack.

24