VeriFone 3350 manual Install a Paper Roll in the Printer

O3350 IG 19496 Book.book Page 15 Wednesday, April 5, 2000 10:30 PM

Omni 3350 Installation Guide

When the terminal has power, the display screen lights and the green LED indicator flashes on and off (if the printer has no paper), or solid green if paper is loaded.

Step 6: Install a Paper Roll in the Printer

The internal printer uses single-ply, thermal-sensitive paper 58 millimeters (2.25 inches) wide and about 25 meters (82 feet) long.

Warning: Poor-quality paper may jam the printer. For high- quality VeriFone paper, refer to the “Accessories and Documentation” section.

Caution: Store thermal paper in a dry, dark area. Handle

thermal paper carefully: impact, friction, temperature, humidity, and oil affect the color and storage characteristics of the paper. Never load a roll of paper with folds, wrinkles, tears, or holes at the edges or in the printing area. For best results, cut a straight edge on the paper with scissors before feeding it into the printer.

Install a Paper Roll

1.Turn on the terminal. (The green LED indicator will blink on and off, indicating the printer needs paper.)

2.Remove the paper roll cover by lifting it up (Figure 7). Two ridges on the cover’s sides show where to grasp it.

15