![](/images/new-backgrounds/1077490/7749023x1.webp)
Cooling Off Mode
Cooling Off mode (also called Shop mode), is designed for use by retailers when they are displaying refrigerators on the shop floor. In Cooling Off mode, the refrigerator's fan motor and lights work normally, but the compressors do not run, and the refrigerator and freezer do not get cold.
To start Cooling Off mode, touch and hold the Energy Saver button and the Power Freeze button for 5 seconds during normal operation. The refrigerator chime sounds and the temperature display flashes OF OF.
To cancel Cooling Off mode, touch and hold the Energy Saver and the Power Freeze buttons again for 5 seconds.
CHANGING THE WATER FILTER
To reduce risk of water damage to your
WARNING property DO NOT use generic brands of water filters in your SAMSUNG Refrigerator.
USE ONLY SAMSUNG BRAND WATER FILTER. SAMSUNG will not be legally responsible for any damage, including, but not limited to property damage caused by water leakage from use of a generic water filter. SAMSUNG Refrigerators are designed to work ONLY WITH SAMSUNG Water Filter.
The Filter light turns red to let you know when |
it is time to change your water filter cartridge. |
( 9 ) Ice Off
If you don’t want to make more ice, touch the Ice Off button.
The icon will light up and the
We recommend you stop ice making if the following occur:
-There is enough ice in the ice bucket.
-You want to save water and energy.
-Water is not being supplied to the
refrigerator.
If the ice maker function is ON, and the water Line is not connected, there
will be a water valve noise from the
back of the unit, press the Ice Off
(Hold 3sec for child lock) button for less than 3 seconds until the Ice Off
Indicator ( ) illuminates.
To give you time to get a new filter, the red |
|
light comes on just before the capacity of the |
|
current filter runs out. Changing the filter on | (Red) |
time provides you with the freshest, cleanest |
|
water from your refrigerator. |
|
1. Shut off the water supply. Then, turn the water filter ( 1 ) about 1/4 turn,
2. Pull the water filter ( 1 ) from the case filter ( 2 ).
2
1
If you do not press any button(letters not ICON), the display turns off in a few seconds.
If you press any button(letters not ICON), the display lights up again.
The function key will operate after you remove your finger from the letters except E.Saver, Ice and Water key.
( 10 ) Filter | Water filter usage | |
This icon will light up when you need to | ||
| ||
| change the filter. After you use about 300 | |
| gallons of water, the filter indicator lights | |
| up. (about 6 months). After you install the | |
| new water filter, reset the filter indicator | |
| by touching the Alarm/hold 3 sec for Filter | |
| Reset button. |
•If water is not dispensing or dispensing slowly, you need to replace the water filter because the water filter is clogged.
•Some areas have large amounts of lime in their water, which causes the water filter to clog more quickly.
12_ operating
•To change the water filter more easily, shut off the water supply valve.
•Sometimes, it is hard to disassemble the water filter because impurities in the water cause it to stick. If you are having difficulties, grip the water filter firmly and pull it hard.
•When you pull the water
filter, a little water can | 2 |
leak from the opening. |
|
This is normal. To | 3 |
minimize the water |
|
leaks, keep the filter |
|
cartridge horizontal when you pull it. |
|
•To prevent overflow, empty the water filter tray ( 3 ) and dry around the filter case ( 2 ).
3. Insert the new filter into the filter case ( 4 ).
4. Push the filter, and then turn it clockwise until it locks.
•If you have trouble inserting the water filter because of high water pressure, shut off the water supply valve.
13. 4. 25. |
�� 2:08