11
Omni 3350 Installation Guide
Telset Port (High-Speed Modem Terminal only)
The first port is identified by a telephone-shaped
“Telset” icon (shown at right). Use this port to
connect a telephone to the Omni3350.
Telco, ISDN, Dial/Leased-Line Port
The second port is identified by the icon shown at
right. Use this port to connect the Omni 3350 to a
telephone wall jack.
Ports for Attaching Optional Peripherals Devices:
In the center are two RJ45-type modular jacks (serial ports):
• The “RS232” serial port (icon shown at right)
connects a VeriFone CR 600 check reader or
other peripheral device.
• The other serial port (identified by “Bar Code”
and “PIN Pad” icons at right) connects a PIN
pad, smart card reader, or bar code wand.
Power Connection Port
• On the lower right is a round port with a lock
notch for securely connecting the terminal to a
power source (identified by the “electrical
power” icon at right).
Step 4: Connect the Terminal to a Telephone Line
1. Direct connection — A telephone cord runs
from the Telco, ISDN, Dial/Leased-Line Port
on the terminal directly to a telephone wall
jack (Figure4). With a direct connection, the
line is dedicated to the terminal.
O3350 IG 19496 Book.book Page 11 Wednesday, April 5, 2000 10:30 PM