![](/images/new-backgrounds/1183841/18384125x1.webp)
O3350 IG 19496 Book.book Page 13 Wednesday, April 5, 2000 10:30 PM
Omni 3350 Installation Guide
Omni 3350 Terminal
Figure 5 Pass-Through Connection
Step 5: Connect the Terminal Power Pack
Caution: Before you connect the terminal power pack, check that the on/off switch is off (shown at right).
1.Insert the round barrel connector (Figure 6) into the power port (identified by the icon at right).
Note: The round barrel connector on the power pack cable has a plastic lock tab that secures the power cable to the terminal.
13