Multi-Tech Systems ISI5634PCI/4/8 manual Auxiliary Relay Control, Flow Control Selection

ISI5634PCI/4/8 User Guide

Command: &Jn	Auxiliary Relay Control
Values:	n = 0
Default:	0
Description: &J0	The auxiliary relay is never closed.
&J1	Not supported—responds ERROR.

Command: &Kn	Flow Control Selection
Values:	n = 0, 3, or 4
Defaults:	3
Description: &K0	Disable flow control.
&K3	Enable CTS/RTS hardware flow control.
&K4	Enable XON/XOFF software flow control.

Command: &Mn	CommunicationsMode
Values:	n = 0
Defaults:	0
Description: &M0	Asynchronous mode.
&M1	Not supported—responds ERROR.

Command: &Qn	AsynchronousCommunicationsMode
Values:	n = 0, 5, 6, 8, or 9
Default:	5
Description: &Q0	Asynchronous with data buffering. Same as \N0.
&Q5	Error control with data buffering. Same as \N3.
&Q6	Asynchronous with data buffering. Same as \N0.
&Q8	MNP error control mode. If MNP error control is not
	established, the modem falls back according to the set-
	ting in S36.
&Q9	V.42 or MNP error control mode. If neither error control
	is established, the modem falls back according to the
	setting in S36.
Command: &Sn	Data Set Ready (DSR) Control
Values:	n = 0 or 1
Default:	0
Description: &S0	Forces DSR always high (on).
&S1	Lets DSR go high only during a connection.

84