Multi-Tech Systems ISI5634PCI/4/8 specs

Chapter 3—Software/Driver Installation

A second sequence of ‘installation wizard’ screens appears. This sequence of screens deals with the setting up of ISI ports. The first screen in this sequence is the Found New Hardware Wizard -- Welcome screen.

The Found New Hardware -- MultiTech ISI Port screen will appear once for each modem on the ISI5634PCI card:

•8 times for the ISI5634PCI-8; or,

•4 times for the ISI5634PCI-4.

12.The Install Hardware Device Drivers screen appears.

Select “Search for a suitable driver ... “ and click Next.

23

Image 23

Multi-Tech Systems ISI5634PCI/4/8 manual Times for the ISI5634PCI-8 or Times for the ISI5634PCI-4

Contents

ISI5634PCI/4/8 User Guide User Guide Model ISI5634PCI/4/8 Contents 105 RedHat Linux 6.2/7.0 RPM Drivers for102 104 Introduction and Description ISI5634PCI Modems Introduction Introduction and Description IntelligentSerialInterface ISI5634PCI Applications How to Use This Manual Following related manuals are available on request What Is in Your Modem Package?Related Manuals Full User Guide on CD-ROM Pentium- based PC or compatible with PCI Bus Architecture Technical SpecificationsComputer Requirements Physical/Electrical/Environmental Hardware Installation Installing the ISI5634PCI card Without the auxiliary module Safety Warnings TelecomHardware Installation Procedures Hardware Installation Installing the ISI5634PCI card with the auxiliary module Mounting screws ISI5634PCI/4/8 User Guide Software/Driver Installation Shut down Windows 2000 and turn off the PC Installing ISI5634PCI Software for Windows Software/Driver Installation ISI5634PCI/4/8 User Guide Driver File Search Results screen appears Completion screen will appear ClickFinish Select Search for a suitable driver ... and click Next Install Hardware Device Drivers screen appearsTimes for the ISI5634PCI-8 or Times for the ISI5634PCI-4 ClickNext Driver installation for the ISI5634PCI card is complete ISI5634PCI for Windows 2000 Installing Modems to COM Ports Click Have Disk Add/Remove Hardware Wizard screen will appear ISI5634PCI/4/8 User Guide Software/Driver Installation ISI5634PCI/4/8 User Guide Remove ISI5634PCI Driver Windows ISI5634PCI/4/8 User Guide Installing the ISI5634PCI Card in Windows NT 3.51/4.0 Select Network Adapter dialog box appears. Click Have Disk ClickAdd Software/Driver Installation ISI5634PCI/4/8 User Guide Installing Modems to COM Ports in Windows NT Install New Modem Models dialog box appears Software/Driver Installation ISI5634PCI/4/8 User Guide Software/Driver Installation Turn off the PC To complete an uninstall, reboot your computerRemoving ISI5634PCI Driver in Windows NT 3.51/4.0 Network dialog box appears. Click the Adapters tab Follow either 6A or 6B, but not both ISI5634PCI/4/8 User Guide Page ISI5634PCI/4/8 User Guide Installing Modems to COM Ports in Win 95 /98/Me ISI5634PCI/4/8 User Guide Software/Driver Installation ISI5634PCI/4/8 User Guide Removing the ISI5634PCI Driver Windows 95/98/Me NetWare Driver Installation Removing the Driver Novell Configuring Ports for NetWare ConnectSCO Open Server 5 Driver Installation # cd Enter To install from CD-ROMTo format a floppy disk for SCO5 To untar the driver file and copy files onto floppy disk Highlight driver file from local host and select Continue To install driver from floppy diskSelect Install New MultiTech Installation Script This text appears on the screen Basename prefixboard numberport letter ISI5634PCI/4/8 User Guide Ttylbx Activating Ports in SCO Open Server Removing the Driver SCO Open Server Linux Pre-Installation IssuesLinux Driver for ISI5634PCI-4/8 Linux Copying and untarring the driver from a floppy Issued from time to timeLinux Copying the driver from the media Linux Copying and untarring the driver from CD-ROM Steps for copying the driver from a floppy Linux Driver installation and loading To view busy IRQs, enter Linux Setting the baud rateLinux Verifying the ports For the ISI5634PCI-8, it uses the following Linux TTY Devices Created by the DriversFor the ISI5634PCI-4, it uses the following For ISI5634PCI-4 cards 4 ports Linux -- Dial-in configurationLinux -- PPP setup To load the driver manually, use insmod MiscellaneousRemoving the ISI Driver Linux LINUX-RPM Copying the driver from CD-ROM LINUX-RPM Pre-Installation IssuesMount the CD-ROM using this command LINUX-RPM Copying the driver from the media For RPM version 7.0, issue the command List the RPM files on the CD-ROM using this command lsFor RPM version 6.2, issue the command Software/Driver Installation LINUX-RPM TTY Devices Created by the Drivers LINUX-RPM Verifying the ports LINUX-RPM -- PPP setup LINUX-RPM -- Dial-in configuration Number Installing and Configuring Your SoftwareCommands Removing the ISI Driver Linux-RPM Software/Driver Installation World Wide Web ReferencesISI5634PCI User Guide Chapter AT Commands Answer AT Command SummaryRepeatLastCommand CommunicationStandardSetting ATDT1028806127853500$123456789 Carrier ControlDial HookControl Command DS=y Dial Stored Telephone NumberEchoCommandModeCharacters Echo Online Data Characters Pulse Dialing Return Online to Data ModeResult Codes Enable/Disable ModulationHandshake ResultCodeFormat Set Register ValueRead Register Value Tone Dialing Auto Retrain ModemResetLong Space Disconnect 22bis Guard Tone Control LoadFactorySettingsData Carrier Detect DCD Control DataTerminalReadyDTRControl AsynchronousCommunicationsMode Auxiliary Relay ControlFlow Control Selection CommunicationsMode Select Stored Configuration for Hard Reset Test CommandsDisplay Current Settings Command &Wn Store Current Configuration ModemPortFlowControl Command &Zy=xStore Dialing CommandSelect Maximum MNP Block Size Transmit Break Break Control Protocol Result Code Error Correction Mode SelectionInactivityTimer Data Calling Tone Command %Cn Data Compression ControlCommand %DCnATCommandControl XON/XOFFPass-Through DTR Dialing Command %En FallbackandFallForwardControlCommand +ES=n EnableSynchronousBufferedMode Command #CBAn Callback Attempts Command #CBIn Callback Inactivity Timer Command #CBDn Callback DelayCommand #CBF? Callback Failed Attempts Display Command #CBFR Callback Failed Attempts Reset Store Setup Password Callback Security ResetCommand #CBSn Callback Enable/Disable EnterSetupPassword Remote modem. The remote configuration escape Controlling Dtmf Functionality with the command +FCLASS=Mostly to issue hangup command +++ATHcr Command %%%ATcrRemote ConfigurationEscape Sequence Digit Low High About Dtmf Registers A negotiation failure when error Disables remote configurationDecimal 255 Disables, 1-255 enables Modulation Timer. See also the \T command = 300 bps = maximum modem speed= reserved = 1200/75 bps S89 seconds 255 Sets the length of time in the off-line Is also disabled = disable= enable S43 decimal For certain types of connections Verbose Description Result Codes Blacklisted Dialed number is blacklisted Delayed Warranty, Service, and Tech Support Software User License Agreement 103 On-Line Warranty Registration Limited Warranty Recording ISI5634PCI Information Tech Support About the Internet Service Appendices 108 Fax612785-9874 Woodale Drive800328-9717 612785-3500 FCC Part Class a StatementIndustry Canada Canadian Limitations Notice Ringer Equivalence Number Fax Branding Statement EMC, Safety and R&TTE Directive Compliance International Modem Restrictions New Zealand Telecom Warning Notice 114 Index Index 117 118 119 120 121 122