Multi-Tech Systems ISI5634PCI/4/8 manual after power-up, Command %En FallbackandFallForwardControl

ISI5634PCI/4/8 User Guide

%DC1 The modem ignores AT commands.
	Note: The modem responds to AT%DC for 10 seconds
	after power-up.
Command: %En FallbackandFallForwardControl
Values:	n = 0, 1, or 2
Default:	2
Description: %E0	Disable fallback and fall forward.
%E1	Enable fallback, disable fall forward.
%E2	Enable fallback and fall forward.
Command: $Dn	DTR Dialing
Values:	n = 0 or 1
Default:	0
Description: $D0 Disables DTR dialing.
$D1	Dials number in memory location 0 when DTR goes high.
Command: $EBn	Asynchronous Word Length
Values:	n = 0 or 1
Default:	0
Description: $EB0	Enables 10-bit mode.
$EB1	Enables 11-bit mode.
Command: +ES=n EnableSynchronousBufferedMode
Values:	n = 6
Default:	None
Description:	Allows an H.324 video application direct access to the
	synchronous data channel. On underflow, the modem
	sends HDLC flag idle (0x7E) to the remote modem. This
	special error control mode is overridden by any of the
	following commands: &F, &M, &Q, or \N.
	AT+ES=? shows the only allowed value.
	AT+ES? shows the current value.
Command: #CBAn Callback Attempts
Values:	n = 1–255
Default:	4
Description:	Sets the number of callback attempts allowed after
	passwords have been exchanged between modems.·

90