Multi-Tech Systems ISI5634PCI/4/8 manual Installing the ISI5634PCI Card in Windows NT 3.51/4.0

Chapter 3—Software/Driver Installation

Installing the ISI5634PCI Card in Windows NT 3.51/4.0

The following procedure describes how to install the ISI5634PCI in a system operating Microsoft Windows NT 3.51 or 4.0 for use with Remote Access Service (RAS) server and other communications/fax server type applications. These procedures apply to both 3.51 and 4.0.

1.Turn off the PC.

2.Install the ISI5634PCI card in an available PCI expansion slot in the computer. Follow the computer manufacturer's instructions concerning installation of expansion cards. Observe standard precautions regarding electro-static discharge (ESD) when handling the ISI5634PCI board (the board should be kept in its shipping bag until used). During installation, handle the ISI5634PCI circuit card by its edges and keep one hand in contact with the PC chassis.

3.Turn on the PC and start Windows NT.

4.Insert the ISI driver CD-ROM into the CD-ROM drive (if drivers have been downloaded from the MultiTech web site, they will typically be on diskette; in that case, insert diskette into floppy drive).

33