Software/Driver Installation | Multi-Tech Systems ISI5634PCI/4/8

Chapter 3—Software/Driver Installation

9. The ‘Install New Modem - port list’ screen will appear.

Highlight the COM ports on which you want modems to be installed. You must allocate 4 ports for the ISI5634PCI-4, or 8 ports for the ISI5634PCI-8.

ClickNext.

10. A progress screen will appear as modem installation begins.

29

Image 29

Multi-Tech Systems ISI5634PCI/4/8 manual Software/Driver Installation

Contents

ISI5634PCI/4/8 User Guide User Guide Model ISI5634PCI/4/8 Contents 102 RedHat Linux 6.2/7.0 RPM Drivers for104 105 Introduction and Description ISI5634PCI Modems Introduction Introduction and Description IntelligentSerialInterface ISI5634PCI Applications How to Use This Manual Related Manuals What Is in Your Modem Package?Full User Guide on CD-ROM Following related manuals are available on request Computer Requirements Technical SpecificationsPhysical/Electrical/Environmental Pentium- based PC or compatible with PCI Bus Architecture Hardware Installation Installing the ISI5634PCI card Without the auxiliary module Safety Warnings TelecomHardware Installation Procedures Hardware Installation Installing the ISI5634PCI card with the auxiliary module Mounting screws ISI5634PCI/4/8 User Guide Software/Driver Installation Shut down Windows 2000 and turn off the PC Installing ISI5634PCI Software for Windows Software/Driver Installation ISI5634PCI/4/8 User Guide Driver File Search Results screen appears Completion screen will appear ClickFinish Select Search for a suitable driver ... and click Next Install Hardware Device Drivers screen appearsTimes for the ISI5634PCI-8 or Times for the ISI5634PCI-4 ClickNext Driver installation for the ISI5634PCI card is complete ISI5634PCI for Windows 2000 Installing Modems to COM Ports Click Have Disk Add/Remove Hardware Wizard screen will appear ISI5634PCI/4/8 User Guide Software/Driver Installation ISI5634PCI/4/8 User Guide Remove ISI5634PCI Driver Windows ISI5634PCI/4/8 User Guide Installing the ISI5634PCI Card in Windows NT 3.51/4.0 Select Network Adapter dialog box appears. Click Have Disk ClickAdd Software/Driver Installation ISI5634PCI/4/8 User Guide Installing Modems to COM Ports in Windows NT Install New Modem Models dialog box appears Software/Driver Installation ISI5634PCI/4/8 User Guide Software/Driver Installation Removing ISI5634PCI Driver in Windows NT 3.51/4.0 To complete an uninstall, reboot your computerNetwork dialog box appears. Click the Adapters tab Turn off the PC Follow either 6A or 6B, but not both ISI5634PCI/4/8 User Guide Page ISI5634PCI/4/8 User Guide Installing Modems to COM Ports in Win 95 /98/Me ISI5634PCI/4/8 User Guide Software/Driver Installation ISI5634PCI/4/8 User Guide Removing the ISI5634PCI Driver Windows 95/98/Me NetWare Driver Installation Removing the Driver Novell Configuring Ports for NetWare ConnectSCO Open Server 5 Driver Installation To format a floppy disk for SCO5 To install from CD-ROMTo untar the driver file and copy files onto floppy disk # cd Enter Highlight driver file from local host and select Continue To install driver from floppy diskSelect Install New MultiTech Installation Script This text appears on the screen Basename prefixboard numberport letter ISI5634PCI/4/8 User Guide Ttylbx Activating Ports in SCO Open Server Removing the Driver SCO Open Server Linux Pre-Installation IssuesLinux Driver for ISI5634PCI-4/8 Linux Copying the driver from the media Issued from time to timeLinux Copying and untarring the driver from CD-ROM Linux Copying and untarring the driver from a floppy Steps for copying the driver from a floppy Linux Driver installation and loading To view busy IRQs, enter Linux Setting the baud rateLinux Verifying the ports For the ISI5634PCI-8, it uses the following Linux TTY Devices Created by the DriversFor the ISI5634PCI-4, it uses the following For ISI5634PCI-4 cards 4 ports Linux -- Dial-in configurationLinux -- PPP setup To load the driver manually, use insmod MiscellaneousRemoving the ISI Driver Linux Mount the CD-ROM using this command LINUX-RPM Pre-Installation IssuesLINUX-RPM Copying the driver from the media LINUX-RPM Copying the driver from CD-ROM For RPM version 7.0, issue the command List the RPM files on the CD-ROM using this command lsFor RPM version 6.2, issue the command Software/Driver Installation LINUX-RPM TTY Devices Created by the Drivers LINUX-RPM Verifying the ports LINUX-RPM -- PPP setup LINUX-RPM -- Dial-in configuration Commands Installing and Configuring Your SoftwareRemoving the ISI Driver Linux-RPM Number Software/Driver Installation World Wide Web ReferencesISI5634PCI User Guide Chapter AT Commands RepeatLastCommand AT Command SummaryCommunicationStandardSetting Answer ATDT1028806127853500$123456789 Carrier ControlDial EchoCommandModeCharacters Command DS=y Dial Stored Telephone NumberEcho Online Data Characters HookControl Result Codes Enable/Disable Return Online to Data ModeModulationHandshake Pulse Dialing Read Register Value Set Register ValueTone Dialing ResultCodeFormat Auto Retrain ModemResetLong Space Disconnect Data Carrier Detect DCD Control LoadFactorySettingsDataTerminalReadyDTRControl 22bis Guard Tone Control Flow Control Selection Auxiliary Relay ControlCommunicationsMode AsynchronousCommunicationsMode Display Current Settings Test CommandsCommand &Wn Store Current Configuration Select Stored Configuration for Hard Reset Select Maximum MNP Block Size Command &Zy=xStore Dialing CommandTransmit Break ModemPortFlowControl Break Control Protocol Result Code Error Correction Mode SelectionInactivityTimer Command %DCnATCommandControl Command %Cn Data Compression ControlXON/XOFFPass-Through Data Calling Tone Command +ES=n EnableSynchronousBufferedMode Command %En FallbackandFallForwardControlCommand #CBAn Callback Attempts DTR Dialing Command #CBF? Callback Failed Attempts Display Command #CBDn Callback DelayCommand #CBFR Callback Failed Attempts Reset Command #CBIn Callback Inactivity Timer Command #CBSn Callback Enable/Disable Callback Security ResetEnterSetupPassword Store Setup Password Mostly to issue hangup command +++ATHcr Controlling Dtmf Functionality with the command +FCLASS=Command %%%ATcrRemote ConfigurationEscape Sequence Remote modem. The remote configuration escape Digit Low High About Dtmf Registers Decimal 255 Disables, 1-255 enables Modulation Disables remote configurationTimer. See also the \T command A negotiation failure when error = reserved = maximum modem speed= 1200/75 bps = 300 bps = enable S43 decimal Is also disabled = disableFor certain types of connections S89 seconds 255 Sets the length of time in the off-line Verbose Description Result Codes Blacklisted Dialed number is blacklisted Delayed Warranty, Service, and Tech Support Software User License Agreement 103 On-Line Warranty Registration Limited Warranty Recording ISI5634PCI Information Tech Support About the Internet Service Appendices 108 800328-9717 Woodale Drive612785-3500 Fax612785-9874 FCC Part Class a StatementIndustry Canada Canadian Limitations Notice Ringer Equivalence Number Fax Branding Statement EMC, Safety and R&TTE Directive Compliance International Modem Restrictions New Zealand Telecom Warning Notice 114 Index Index 117 118 119 120 121 122