Multi-Tech Systems ISI5634PCI/4/8 manual Carrier Control, Dial string modifiers

ISI5634PCI/4/8 User Guide

Command: Cn	Carrier Control
Values:	n = 1
Default:	1
Description: C0	Transmit carrier always off. (Not supported.)
C1	Normal transmit carrier switching (included for back-
	ward compatibility with some software).

Command: Ds	Dial
Values:	s = dial string (phone number and dial modifiers)
Default:	none
Description:	Dial telephone number s, where s may up to 40
	characters long and include the 0–9, *, #, A, B, C, and
	D characters, and the L, P, T, V, W, S, comma (,),
	semicolon (;), !, @, ^ and $ dial string modifiers.

Dial string modifiers:

LRedial last number. (Must be placed immediately afterATD.)

PPulse-dial following numbers in command.

TTone-dial following numbers in command (default). W Wait for a new dial tone before continuing to dial.

(X2, X4, X5, X6, or X7 must be selected.)

, Pause during dialing for time set in register S8.

; Return to command mode after dialing. (Place at end of dial string.)

! Hook flash. Causes the modem to go on-hook for one- half second, then off-hook again.

@ Wait for quiet answer. Causes modem to wait for a ringback, then 5 seconds of silence, before process- ing next part of command. If silence is not detected, the modem returns a NO ANSWER code.

^ Disable data calling tone transmission.

$ Detect AT&T call card “bong” tone. The character should follow the phone number and precede the user’s call card number:

ATDT1028806127853500$123456789

78