133
Error message | Description |
|
|
Storage device BIOS messages |
|
|
|
Primary Master/Slave Hard Disk | Could not read sector from corresponding |
Error | drive. |
Secondary Master/Slave Hard |
|
Disk Error |
|
3rd Master/Slave Hard Disk |
|
Error |
|
4th Master/Slave Hard Disk |
|
Error |
|
5th Master/Slave Hard Disk |
|
Error |
|
6th Master/Slave Hard Disk |
|
Error |
|
Primary Master/Slave Drive - ATAPI Incompatible
Secondary Master/Slave Drive -
ATAPI Incompatible
3rd Master/Slave Drive -
ATAPI Incompatible
4th Master/Slave Drive -
ATAPI Incompatible 5th Master/Slave Drive -
ATAPI Incompatible
6th Master/Slave Drive -
ATAPI Incompatible
Corresponding drive is not an ATAPI device. Run Setup to make sure device is selected correctly.
S.M.A.R.T. capable but | Failed to send a S.M.A.R.T. message to a |
Command Failed | hard disk. |
|
|
S.M.A.R.T. Status BAD, Backup | An imminent failure is detected by a |
and Replace | S.M.A.R.T. capable hard disk drive. |
|
|
