139
Error code | Description |
|
|
0150 | BSP processor failed BIST |
|
|
0160 | Processor missing microcode – P0 |
|
|
0161 | Processor missing microcode – P1 |
|
|
0180 | BIOS does not support current stepping – P0 |
|
|
0181 | BIOS does not support current stepping – P1 |
|
|
0192 | L2 cache size mismatch |
|
|
0193 | CPUID, processor stepping are different |
|
|
0194 | CPUID, processor family are different |
|
|
0195 | Front side bus mismatch |
|
|
0196 | CPUID, processor model are different |
|
|
0197 | Processor speeds mismatched |
|
|
5120 | CMOS cleared by jumper |
|
|
5121 | Password cleared by jumper |
|
|
51A2 | System cover has probably been opened. |
|
|
51A3 | System has probably been shut down with the |
| CPUTHRMTRIP# event. |
|
|
8104 | Warning! Port 60h/64h emulation is not supported by this |
| USB host controller !!! |
|
|
8105 | Warning! EHCI controller disabled. It requires 64bit data |
| support in the BIOS. |
|
|
84FF | System event log full |
|
|
8500 | Bad or missing memory in slot 3A |
|
|
8501 | Bad or missing memory in slot 2A |
|
|
8502 | Bad or missing memory in slot 1A |
|
|
