Dell DCDO, 710 H2C service manual Removing the Liquid Cooling Assembly

1 power cable 2 data cable

9.Check all cable connections and fold cables out of the way to avoid blocking airflow between the fan and cooling vents.

10.Replace the drive panel (see Replacing the Drive Panel).

11.Replace the computer cover (see Replacing the Computer Cover).

NOTICE: To connect a network cable, first plug the cable in to the network port or device and then plug it in to the computer.

12. Connect your computer and devices to their electrical outlets, and turn them on.

See the documentation that came with the drive for instructions on installing any software required for drive operation.

13. Enter system setup (see Entering System Setup) and select the appropriate Drive option.

Liquid Cooling Assembly

CAUTION: Before you perform this procedure, follow the safety instructions located in the Product Information Guide.

Removing the Liquid Cooling Assembly

1.Follow the procedures in Before You Begin.

2.Remove the computer cover (see Removing the Computer Cover).